Controls, LEDs and Connectors
3.2.2.1.110 GBit Fabric Interface Channel Uplinks
The four cages for the 10 GBit uplinks can be equipped with standard optical SFP+ connectors and support Ethernet connections in compliance with the IEEEE 802.3ak standard. Alternatively, you may populate the SFP+ connectors with SFP connectors for copper and optical Ethernet connections. In this case, only 1 GBit connections are supported.
During the qualification testing of the RTM, the following SFP+ models were used:
z 10Gb/s 850nm Multimode Datacom SFP+ Transceiver (FTLX8571D3BCL). Orderable via Emerson P/N: 5806802A01
z
These modules passed all tests sucessfully without incidents. They are also listed in the Emerson Network Power sales configurator. When using SFP+ modules, we recommend to use these models.
The SFP/SFP+ modules can be installed/removed both while the RTM is powered and non- powered. The presence and also the type of SFP/SFP+ modules is automatically detected.
When using 1 GBit copper SFP modules, the speed is determined through
The following table shows which switch MIB OID each cage corresponds to.
Table
Face Plate Label | MIB OID | Ethernet Type |
|
|
|
FIX XG1 | <shelf>.<slot>.2.17 | 10 GBit |
|
|
|
FIX XG2 | <shelf>.<slot>.2.16 | 10 GBit |
|
|
|
FIX XG3 | <shelf>.<slot>.2.19 | 10 GBit |
|
|
|
FIX XG4 | <shelf>.<slot>.2.18 | 10 GBit |
|
|
|
46 |