Controls, LEDs and Connectors
3.2.2.2.110 GBit Base Interface Uplinks
These cages can be equipped with standard optical SFP+ connectors for 10 Gigabit connections and support Ethernet connections in compliance with the IEEEE 802.3ak standard.
The attached Ethernet switch supports only 10GBit connections on these ports, i.e. 1 GBit SFP modules are not supported.
During the qualification testing of the RTM, the following SFP+ models were used:
z 10Gb/s 850nm Multimode Datacom SFP+ Transceiver (FTLX8571D3BCL). Orderable via Emerson P/N: 5806802A01
z
These modules passed all tests sucessfully without incidents. They are also listed in the Emerson Network Power sales configurator. When using SFP+ modules, we recommend to use these models.
The SFP+ modules can be installed/removed both while the RTM is powered and
The following table shows which switch MIB OID each cage corresponds to.
Table
Face Plate Label | MIB OID | Ethernet Type |
|
|
|
BIX XG1 | <shelf>.<slot>.1.25 | 10 GBit |
|
|
|
BIX XG2 | <shelf>.<slot>.1.26 | 10 GBit |
|
|
|
3.2.2.2.21 GBit Base Interface Uplinks
The four cages for 1 GBit connections can be equipped with standard SFP connectors for copper and optical connections.
| 49 |