Ricoh SP 112 Removing Printing Jams, Automatically removing the paper jammed inside the machine

Page 41

				Paper Feed Problems


	Problem			Solution

Paper gets wrinkles.			•	Paper is damp. Use paper that has been stored properly.
			•	Paper is too thin. See page 15 "Supported Paper".
			•	If there are gaps between the paper and the paper
				guides, adjust the paper guides to remove the gaps.

The printed paper is curled.			•	Load the paper upside down in the paper tray.
			•	Paper is damp. Use paper that has been stored properly.

Images are printed diagonally to the			If there are gaps between the paper and the paper guides,
pages.			adjust the paper guides to remove the gaps.

CER091

Removing Printing Jams

First, try removing the paper automatically. If this fails, remove it manually.

•Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.

•Toner on prints made immediately after clearing a paper jam may be insufficiently fused and can smudge. Make test prints until smudges no longer appear.

•Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine will cause further jams and possibly damage the machine.

•Paper jams can cause pages to be lost. Check your print job for missing pages and reprint any pages that did not print out.

Automatically removing the paper jammed inside the machine

1.Open and close the maintenance cover once.

The machine will then slowly eject the jammed paper. After the jammed paper is ejected, remove it.

39

Image 41

Contents User Guide Page Table of Contents Maintaining the Machine Introduction How to Read This ManualLegal Prohibition DisclaimerCode Xxxx Model-Specific InformationEnvironmental Advice for Users Important Safety InstructionsUser Information on Electrical & Electronic Equipment All Other UsersPage Important Safety Instructions Page Exterior Guide to ComponentsInterior Quick Install Installing the Driver and SoftwareInstalling the Printer Driver Upgrading or Deleting the Printer DriverDeleting the printer driver Installing the Driver and Software What is Smart Organizing Monitor? Supported Paper Loading PaperNon-Recommended Paper Types Print Area Loading Paper Raise up the paper support wire Specifying the paper type and paper size Changing the custom paper size Loading Paper Basic Operation Printing DocumentsPrinting on Both Sides of Sheets Canceling a print job while printing Canceling a Print JobCanceling a print job before printing has started Resetting the Print Job Continuing Printing Using Mismatched PaperPreventing Paper Mismatch Errors If a Paper Mismatch OccursIf a Paper Mismatch Occurs Printing Documents Checking the Status Information Checking the System InformationPrinting the Configuration Page or Test Tab Settings Configuring the Machine SettingsDownload the firmware from the manufacturers Web site Updating the FirmwareReplacing the Print Cartridge Maintaining the MachineClose the maintenance cover Page Cleaning the Inside of the Machine Common Problems TroubleshootingPaper Paper Feed ProblemsAutomatically removing the paper jammed inside the machine Removing Printing JamsRemoving paper manually CXP014 CXP012 Checking the Condition of the Machine Print Quality ProblemsPrinter Problems Print Positions Do Not Match Display Positions Error Message Causes Solutions Out of Toner Troubleshooting Appendix Disposal Where to InquireMoving and Transporting the Machine Print Cartridge ConsumablesGeneral Function Specifications Specifications of the MachinePrinter Function Specifications Microsoft Windows 8 Pro Microsoft Windows 8 Enterprise TrademarksTrademarks Appendix Index Memo Memo EN GB EN US EN AU M178-8608A 2013 EN GB EN US EN AU