4Extend the top handle on the imaging unit and then use it to pull the imaging unit out of the machine completely.
Caution
• Do not touch the green surface on the imaging unit with your hands or any other material. Use the handle on it in order to avoid touching this area.
•Be careful not to scratch the surface of the imaging unit.
•To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary.
5Look inside the machine. Remove any dust, paper particles, and spilled toner with a damp, soft
Note
After cleaning, let the machine to dry completely.
Caution
If your machine or its surrounding is contaminated with toner, we recommend you to use a cloth or tissue dampened with water to clean it. If you use a vacum cleaner, toner blows into the air then might be harmful to you.
6Pull the imaging unit about half and push it until it sounds 'click'. Repeat this action two or three times.
7Push the imaging unit until it sounds 'click' in to the machine.
8Close the front cover firmly.
Caution
If the front cover is not completely closed, the macnine will not operate. Please make sure all toner cartridges are installed properly. If any toner cartridge is installed improperly, the front cover do not close.
9Plug the power cord in and turn the machine on.