5Squeeze the paper length guide and slide in it until it lightly touches the end of the paper stack.
6Close the paper cover.
7Slide the tray back into the machine until it clicks.
Note
After you load paper, you need to set up your machine for the paper type, size, and source you loaded. See Software section.
Changing the size of the paper in the paper tray
The tray is preset to Letter or A4 size, depending on your country. To change the size to A4 or Letter, you must adjust the lever and paper width guide properly.
1Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary.
2If you want to change the size to Letter, hold the lever at the back of the tray, and rotate the lever clockwise.
3Squeeze the paper width guide and slide it to the edge of the lever.
Note
If you want to change the size to A4, first move the paper width guide to left and rotate the lever counterclockwise. If you force the lever, it could damage the tray.
4.5 <Selecting and loading print media>