Samsung SW-224 manual Setting Up the Device Driver, Edit the AUTOEXEC.BAT file

Page 7

SW-224_eng-02 12/19/01 4:42 PM Page 8

Installing the CD Record Utility

To record data on a CD-R or CD-RW disc in the CD-R/RW drive, you must first install the CD record utility. For compatibility reasons, you are recommended to uninstall any existing software of the same type before installing this utility.

1 Insert the disc supplied with the CD-R/RW drive in the drive.

2 Follow the instructions displayed on the screen to install the utility. Refer to the separate utility documentation for further details.

3 Store the utility disc in a safe place.

Installing the Device Driver

No additional device driver is needed for Windows 95/98/2000/ME/XP/NT4.0, as the default Windows device driver is used. You can check that the CD-R/RW drive has been correctly detected by Windows. To do so, proceed as follows.

1 Double-click on the My Computer icon on your desktop.

2 Double-click on the Control Panel folder.

3 Double-click on the System icon.

4 Click on the Device Manager tab.

5 Expand the CD-ROMbranch.

The SAMSUNG CD-R/RW SW - *** device name is displayed.

The SAMSUNG device driver enables discs in the CD-R/RW drive to be read but not recorded in an MS-DOS environment; the driver is located in the D driver folder on the CD record utility disc.

Setting Up the Device Driver

◆Automatic Setup

1Insert the setup diskette in the diskette drive and change the directory to A:, where A: is the diskette drive.

To do so, type A: after the C:\ prompt and press [Enter].

2Type CDSETUP and press [Enter].

3Reboot the computer.

◆Manual Setup

1 Make the C:\SAMSUNG directory.

2 Copy the files from the diskette to the C:\SAMSUNG directory.

To do so, type COPY A:*.* C:\SAMSUNG after the C:\ prompt and press [Enter].

3 Edit the CONFIG.SYS file.

Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000 /V entry.

LAST DRIVE = Z

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

DEVICE = C :\SAMSUNG\SSCDROM.SYS /D : SSCD000 /V

4 Edit the AUTOEXEC.BAT file.

Add the C:\SAMSUNG\MSCDEX /D:SSCD000 entry.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

C :\SAMSUNG\MSCDEX /D:SSCD000

5 Reboot the computer.

8

9

Image 7

Contents Page SW-224 Users Guide Contents Safety PrecautionsUpgrading the Firmware Flash Memory About DMA InstallationDMA Setting Your CD-R/RW DriveConnecting the Cables Installing the CD-R/RW DriveConnecting the E-IDE cable Two configurations are possible Add the C\SAMSUNG\MSCDEX /DSSCD000 entry Setting Up the Device DriverAdd the DEVICE=C\SAMSUNG\SSCDROM.SYS \DSSCD000 /V entry Edit the AUTOEXEC.BAT filePlaying Audio CDs Using the CD-R/RW DriveStoring and Cleaning Your Discs Push the power button and boot the computerPlease refer to help menu of writing software provided Recommended Disc TypesHow to cancel select the Auto-Run function What is Buffer Under-Run?What is Auto-Run? What is Super-Link?Meaning / Solution Solving Technical ProblemsTechnical Specifications Manual del usuario Índice general Precauciones de seguridadActualización de la memoria flash del firmware Su unidad de CD grabable/regrabableRequisitos del sistema Conexión de los cables Instalación de la unidadConexión del cable E-IDE Edite el archivo AUTOEXEC.BAT Configuración del controlador del dispositivoAgregue la entrada C\SAMSUNG\MSCDEX /DSSCD000 El indicador luminoso se enciende Reproduzca el disco CD Uso de la unidad de CD grabable/regrabableAlmacenamiento y limpieza de los discos Presione el botón de alimentación y arranque el ordenadorTipos de discos recomendados Qué es Auto-Run? Precaución con los erroresDescripción de los Términos Qué es Buffer Under-Run?Significado / Solución Solución de problemas técnicosDe CD-R/RW CD-R/RW despuésEspecificaciones técnicas Bedienungsanleitung Deutsch CD-ROM-Schublade LautstärkereglerNotöffnung LED-Anzeige Lesen/SchreibenDMA Einstellung Über die DMA InstallationBetrifft Beschreibung WichtigBenutzen von zwei KabelanschlußGebrauch von einem 1E-IDE KabelWiedergabe von Audio CDs Empfohlene Discs Probleme während der AufzeichnungWas bedeutet Auto-Run? Hinweise bei FehlermeldungenErklärung der Begriffe Was bedeutet Buffer Under-Run?Problem Ursache/Abhilfe Falls Probleme auftretenXP oder NT4.0 Arbeitsplatz System steverung Geräte ManagerSamsung CD-R/RW SW Recorder Samsung CD-R/RW SWLe Guide De L’utilisateur-FRANÇAIS Le trou déjection durgence Bouton contrôle volumeDispositif de configuration pontet Prise CasqueConditions requises du système Mode dinstallation du lecteur CD-R/RWMode de Upgrade de Flash Memory Pumware Installation du DMAConnexion au câble E-IDE Mode de connexion au câbleConnexion au câble du secteur Connexion du câble de démarrage au sélecteur Maître/EsclaveMise en marche de CDs audio Autres En cas de problèmes durant lenregistrementAutorun ’explication des termes’avertissement sur la production des erreurs Buffer UnderrunMise en vérification Problème Signification/SolutionVérifiez l’unité CD-R/RWWindows 95/98/2000/ME/XP ou NT Spécifications techniquesMon Ordinateur Contrôle Systéme Manager Enregistrement Samsung CD-R/RW SW