Mitsubishi Electronics PD-5010 manual Operations in the Picture-in-picture mode

Page 23

Operations in the Picture-in-picture mode

To move the position of the sub screen, press the cursor or button.

VIDEO1			RGB/PC1

B

A

button	button
VIDEO1	RGB/PC1

B

A

To change the size of the sub screen, press the ZOOM button.

VIDEO1		RGB/PC1

B
A	RGB/PC1
VIDEO1	RGB/PC1
ZOOM—	B
button	B
button
A	VIDEO1	RGB/PC1
ZOOM+	VIDEO1	RGB/PC1
button
ZOOM—	B
button	B
button
ZOOM+	A	VIDEO1	RGB/PC1
ZOOM+
button
button
	ZOOM—	A	B
	button	A	B
	button
	ZOOM+
	button

To make the desired picture active, press the SELECT button.

VIDEO1

RGB/PC1

B

A

SELECT button

VIDEO1 RGB/PC1

B

A

Selecting the input signals to be displayed

1.Press the SELECT button to make the desired picture active.

2.Press the RGB/PC, VIDEO, or DVD/HD button. Each press of the button changes the selection of the input signal.

The INPUT button on the monitor can also be used to change the selection.

Adjusting the ON-SCREEN MENU controls

1.Press the SELECT button to make the desired picture active.

2.Press the MENU/ENTER button to display the MAIN MENU.

3.Adjust the setting to your preference.

For details, see “On Screen Menu Controls” on page 18.

Note:

•During Multi screen mode, Auto Adjust does not affect the screen.

•During Multi screen mode, some functions of the MENU controls are not available.

17

Image 23

Contents Owner’s Guide Page Important Information PrecautionsTo avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Information Basic OperationsTo check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerWatching with a wide screen manual Wide OperationsWatching computer images When Picture Size is set to OFFInformation Supported resolution Picture Size settingInformation Operations in the Side-by-side modePIP Screen Operations Showing a couple of pictures on the screen at the same timeAdjusting the ON-SCREEN Menu controls Operations in the Picture-in-picture modeSelecting the input signals to be displayed Menu Operations On Screen Menu ControlsMain menu Sub menu Functions Default Adjusting the computer image Picture Settings MenuAdjusting the picture Information Video Settings screenInformation Types of picture modes Example Setting the Theater modeInformation Setting the color temperature Setting the color temperatureExample Setting LOW Once the setting is completedInformation Adjusting the white balance Adjusting the color to the desired qualityExample Adjusting the White Balance Types of noise reduction Example Setting NR-3Reducing noise in the picture Information Sound settings menu Audio Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bassInformation When Auto Picture is OFF Monitor Settings MenuExample Adjusting the vertical position in the normal mode Function Menu Setting the on-screen menuExample Turning the on-screen menu mode off Information Adjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the positionPower management settings Setting the power management for computer imagesExampleTurning the power management function on Information Power management functionPOWER/STANDBY indicator Example Setting the Cinema Mode to OFF Setting the gray level for the sides of the screenSetting the picture to suit the movie Example Adjusting the Gray LevelExample Setting PLE to Lock Setting Monitorlink M-LINK ADJExample Setting Information When you adjust the M-LINK ADJPeak Luminance Enhancement PLE Setting the time for InverseTo select on for the Working Time Setting the time for Screen WiperInformation Setting the time Speed Resetting to the default valuesExample Setting Audio 1 to Video Options Setting MenuSetting the allocation of the audio connectors Setting the BNC connectorsSee page 55 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionInformation HD Select modes Setting high definition images to the suitable screen sizeSetting the picture size for RGB input signals Information Menu Setting the language for the menusExample Setting the menu display to Deutsch Information Language settingsTo select 3.58 Ntsc Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc Information Video signal formatsCommunication Format External ControlApplication ConnectionsInput Switch Change Command Reference ListPower on Power OFFContrast Gain Data Volume Gain DataAudio Mute On Audio Mute OffRED Gain Data Picture Mode SelectColor Gain Data Bass Gain Data NR Mode SetGreen Gain Data Blue Gain Data23. H. Position Gain Data Screen Mode SelectBalance Gain Data 22. V. Position Gain DataMenu Select Phase Gain DataAuto Picture Select Clock Gain DataGray Level Set Power MGT SelectCinema Mode Set Menu ADJ. Gain DataAudio Select Set Inverse SetScreen Wiper Set Language Select RGB SelectHD Select Picture Size SelectMulti Screen Select Color System SelectHorizontal sync polarity Input Mode RequestFrequency Request Video ADJ Request Model Name Request Failure Mode RequestAudio Select Request Computer input signals supported by this system Table of Signals SupportedSupported resolution Page Symptom Checks Remedy TroubleshootingSignals SpecificationsPage Mitsubishi Plasma Display Panel Limited Warranty