Mitsubishi Electronics PD-5010 manual Function Menu, Setting the on-screen menu

Page 33

Information

￿Adjusting the Auto Picture

ON

The Picture ADJ and Fine Picture

 

adjustments are made automatically.

OFF

The Picture ADJ and Fine Picture

 

adjustments are made manually.

￿Adjusting the position of the image

V-POSITION ...Adjusts the vertical position of the image.

H-POSITION ... Adjusts the horizontal position of the image.

V-HEIGHT ......Adjusts the vertical size of the image.

(Except for STRETCHED mode) H-WIDTH ........Adjusts the horizontal size of the

image. (Except for STRETCHED mode)

FINE PICTURE* .... Adjusts for flickering.

PICTURE ADJ* .... Adjusts image resolution.

*The Picture ADJ and Fine Picture features are available only when the “Auto Picture” is off.

*The AUTO PICTURE, FINE PICTURE and PICTURE ADJ. are available only for RGB signals.

￿Restoring the factory default settings

To restore the original factory settings, go back to the MAIN MENU. Select “FUNCTION,”and then select “RESET”. Note that this also restores other settings to the factory defaults except for Auto Picture.

Function Menu

Setting the on-screen menu

When using the monitor for presentations, etc., the monitor can be set so that the input source, screen mode, etc., do not appear.

Example: Turning the on-screen menu mode off

Press the MENU/ENTER button on the remote control to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the MENU/ENTER button.

The “FUNCTION” screen appears.

2.Use the ▲ and ▼ buttons to select “MENU”.

F U N C T I O N

MENU

 

 

:

ON

MENU ADJ.

 

:

1

 

POWER MGT

 

:

OFF

GRAY LEVEL

 

:

3

 

CINEMA MODE

:

ON

M-LINK ADJ.

 

:

1

 

LONG LIFE

 

 

 

 

RESET

 

 

 

 

SEL.

ADJ.

 

 

RETURN

 

EXIT

3.To turn the on-screen menu mode off ...

Use the ￿ and ￿ buttons to select “OFF”.

The mode switches as follows each time the ￿ or ￿ button is pressed:

ONOFF

F U N C T I O N

MENU

 

 

:

OFF

MENU ADJ.

 

:

1

 

POWER MGT

 

:

OFF

GRAY LEVEL

 

:

3

 

CINEMA MODE

:

ON

M-LINK ADJ.

 

:

1

 

LONG LIFE

 

 

 

 

RESET

 

 

 

 

SEL.

ADJ.

 

 

RETURN

 

EXIT

4.Once the setting is completed ...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

￿MENU modes

ON

The on-screen menu appears.

OFF

The on-screen menu does not appear.

￿Restoring the factory default settings

To restore the original factory settings, go back to the MAIN MENU. Select “FUNCTION,”and then select “RESET”. Note that this also restores other settings to the factory defaults.

27

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Owner’s Guide Page Important Information PrecautionsTo avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Information Basic OperationsTo cancel the off timer To set the off timerAfter the power is turned off with the off timer To check the remaining timeWatching with a wide screen manual Wide OperationsInformation Supported resolution When Picture Size is set to OFFPicture Size setting Watching computer imagesPIP Screen Operations Operations in the Side-by-side modeShowing a couple of pictures on the screen at the same time InformationOperations in the Picture-in-picture mode Selecting the input signals to be displayedAdjusting the ON-SCREEN Menu controls Menu Operations On Screen Menu ControlsMain menu Sub menu Functions Default Adjusting the picture Picture Settings MenuInformation Video Settings screen Adjusting the computer imageInformation Types of picture modes Example Setting the Theater modeExample Setting LOW Setting the color temperatureOnce the setting is completed Information Setting the color temperatureAdjusting the color to the desired quality Example Adjusting the White BalanceInformation Adjusting the white balance Example Setting NR-3 Reducing noise in the pictureTypes of noise reduction Adjusting the treble, bass and left/right balance Audio Settings MenuExample Adjusting the bass Information Sound settings menuMonitor Settings Menu Example Adjusting the vertical position in the normal modeInformation When Auto Picture is OFF Setting the on-screen menu Example Turning the on-screen menu mode offFunction Menu Example Adjusting the position of the menu display Adjusting the position of the menu displayTo adjust the position Information Adjusting the position of the menu displayExampleTurning the power management function on Setting the power management for computer imagesInformation Power management function Power management settingsPOWER/STANDBY indicator Setting the picture to suit the movie Setting the gray level for the sides of the screenExample Adjusting the Gray Level Example Setting the Cinema Mode to OFFExample Setting Setting Monitorlink M-LINK ADJInformation When you adjust the M-LINK ADJ Example Setting PLE to LockPeak Luminance Enhancement PLE Setting the time for InverseSetting the time for Screen Wiper Information Setting the timeTo select on for the Working Time Speed Resetting to the default valuesSetting the allocation of the audio connectors Options Setting MenuSetting the BNC connectors Example Setting Audio 1 to VideoExample Setting the RGB Select mode to Motion Setting a computer image to the correct RGB select screenTo set the RGB select mode to Motion See page 55 for the details of the above settingsSetting high definition images to the suitable screen size Setting the picture size for RGB input signalsInformation HD Select modes Example Setting the menu display to Deutsch Setting the language for the menusInformation Language settings Information MenuExample Setting the video signal format to 3.58 Ntsc Setting the video signal formatInformation Video signal formats To select 3.58 NtscApplication External ControlConnections Communication FormatPower on Command Reference ListPower OFF Input Switch ChangeAudio Mute On Volume Gain DataAudio Mute Off Contrast Gain DataPicture Mode Select Color Gain DataRED Gain Data Green Gain Data NR Mode SetBlue Gain Data Bass Gain DataBalance Gain Data Screen Mode Select22. V. Position Gain Data 23. H. Position Gain DataAuto Picture Select Phase Gain DataClock Gain Data Menu SelectCinema Mode Set Power MGT SelectMenu ADJ. Gain Data Gray Level SetInverse Set Screen Wiper SetAudio Select Set HD Select RGB SelectPicture Size Select Language SelectMulti Screen Select Color System SelectInput Mode Request Frequency RequestHorizontal sync polarity Video ADJ Request Failure Mode Request Audio Select RequestModel Name Request Table of Signals Supported Supported resolutionComputer input signals supported by this system Page Symptom Checks Remedy TroubleshootingSignals SpecificationsPage Mitsubishi Plasma Display Panel Limited Warranty
Top Page Image Contents