Mitsubishi Electronics PD-5010 Audio Select Request, Failure Mode Request, Model Name Request

Page 60

49. Audio Select Request

Function

The external control equipment inquires the current combinations of audio and video inputs for the plasma monitor.

Transmission Data

1FH 80H 60H 6FH 00H CKS

ACK

The plasma monitor returns the following ACK:

7FH 60H 80H 6FH 03H DATA00 DATA01 DATA02 CKS

DATA00:	AUDIO 1
	01H – 0CH: VISUAL INPUT DATA
DATA01:	AUDIO 2
	01H – 0CH: VISUAL INPUT DATA
DATA02:	AUDIO 3
	01H – 0CH: VISUAL INPUT DATA
	VISUAL INPUT DATA
	01H:	Video 1
	02H:	Video 2
	03H:	Video 3
	05H:	HD (HD1 or DTV or DTV 1)
	06H:	HD2 (DTV2)
	07H:	RGB 1 /PC 1
	08H:	RGB 2 /PC 2

50. Failure Mode Request

Function

The external control equipment inquires the detection of failures of the plasma monitor.

Transmission Data

1FH 80H 60H 3FH 00H CKS

ACK

The plasma monitor returns the following ACK:

7FH 60H 80H 3FH 02H DATA00 DATA01 CKS

DATA00: FAILURE MODE 1

Bit 0 : PDP MODULE

0:Abnormal

1:Normal

Bit 1 : 1: fixed (backup)

Bit 2 : TEMPERATURE

0:Abnormal

1:Normal

Bit 3 : FAN

0:Abnormal

1:Normal

Bit 4 : 1: fixed (backup)

Bit 5 : 1: fixed (backup)

Bit 6 : 1: fixed (backup)

Bit 7 : 1: fixed (backup)

DATA01: FAILURE MODE 2

Bit 0–7 : 1: fixed (backup)

51. MODEL NAME Request

Function

The external control equipment inquires the product code of the plasma monitor.

Transmission Data

1FH 80H 60H 17H 00H CKS

ACK

The plasma monitor returns the following ACK:

	7FH 60H 80H 17H			0CH DATA00 to			DATA11 CKS
DATA00 : 1st character of the product code
DATA01 : 2nd character of the product code
DATA11 : 12th character of the product code

NOTE:

	Received data (Hex)				Corresponding character

	00H				0
	01H				1

	08H				8
	09H				9
	10H				A
	11H				B
	12H				C

	28H				Y
	29H				Z
	80H				- (Hyphen)
	96H				(Blank)

If there are fewer than 12 characters in the product code, product code would be padded right with blanks.

Example: If the product code of your plasma monitor is “PD-5010”, the returned codes would be as follows.

DATA00: 1FH

DATA01: 27H

DATA02: 80H

DATA03: 05H

DATA04: 00H

DATA05: 27H

DATA06: 1CH

DATA07: 02H

DATA08: 10H

DATA09: 96H

DATA10: 96H

DATA11: 96H

54

Image 60

Contents Owner’s Guide Page Precautions Important InformationTo avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Basic Operations InformationTo set the off timer To cancel the off timerAfter the power is turned off with the off timer To check the remaining timeWide Operations Watching with a wide screen manualWhen Picture Size is set to OFF Information Supported resolutionPicture Size setting Watching computer imagesOperations in the Side-by-side mode PIP Screen OperationsShowing a couple of pictures on the screen at the same time InformationOperations in the Picture-in-picture mode Selecting the input signals to be displayedAdjusting the ON-SCREEN Menu controls On Screen Menu Controls Menu OperationsMain menu Sub menu Functions Default Picture Settings Menu Adjusting the pictureInformation Video Settings screen Adjusting the computer imageExample Setting the Theater mode Information Types of picture modesSetting the color temperature Example Setting LOWOnce the setting is completed Information Setting the color temperatureAdjusting the color to the desired quality Example Adjusting the White BalanceInformation Adjusting the white balance Example Setting NR-3 Reducing noise in the pictureTypes of noise reduction Audio Settings Menu Adjusting the treble, bass and left/right balanceExample Adjusting the bass Information Sound settings menuMonitor Settings Menu Example Adjusting the vertical position in the normal modeInformation When Auto Picture is OFF Setting the on-screen menu Example Turning the on-screen menu mode offFunction Menu Adjusting the position of the menu display Example Adjusting the position of the menu displayTo adjust the position Information Adjusting the position of the menu displaySetting the power management for computer images ExampleTurning the power management function onInformation Power management function Power management settingsPOWER/STANDBY indicator Setting the gray level for the sides of the screen Setting the picture to suit the movieExample Adjusting the Gray Level Example Setting the Cinema Mode to OFFSetting Monitorlink M-LINK ADJ Example SettingInformation When you adjust the M-LINK ADJ Example Setting PLE to LockSetting the time for Inverse Peak Luminance Enhancement PLESetting the time for Screen Wiper Information Setting the timeTo select on for the Working Time Resetting to the default values SpeedOptions Setting Menu Setting the allocation of the audio connectorsSetting the BNC connectors Example Setting Audio 1 to VideoSetting a computer image to the correct RGB select screen Example Setting the RGB Select mode to MotionTo set the RGB select mode to Motion See page 55 for the details of the above settingsSetting high definition images to the suitable screen size Setting the picture size for RGB input signalsInformation HD Select modes Setting the language for the menus Example Setting the menu display to DeutschInformation Language settings Information MenuSetting the video signal format Example Setting the video signal format to 3.58 NtscInformation Video signal formats To select 3.58 NtscExternal Control ApplicationConnections Communication FormatCommand Reference List Power onPower OFF Input Switch ChangeVolume Gain Data Audio Mute OnAudio Mute Off Contrast Gain DataPicture Mode Select Color Gain DataRED Gain Data NR Mode Set Green Gain DataBlue Gain Data Bass Gain DataScreen Mode Select Balance Gain Data22. V. Position Gain Data 23. H. Position Gain DataPhase Gain Data Auto Picture SelectClock Gain Data Menu SelectPower MGT Select Cinema Mode SetMenu ADJ. Gain Data Gray Level SetInverse Set Screen Wiper SetAudio Select Set RGB Select HD SelectPicture Size Select Language SelectColor System Select Multi Screen SelectInput Mode Request Frequency RequestHorizontal sync polarity Video ADJ Request Failure Mode Request Audio Select RequestModel Name Request Table of Signals Supported Supported resolutionComputer input signals supported by this system Page Troubleshooting Symptom Checks RemedySpecifications SignalsPage Mitsubishi Plasma Display Panel Limited Warranty