Mitsubishi Electronics PD-5010 Setting the time for Screen Wiper, Information Setting the time

Page 40

*The “WORKING TIME” (minutes) and “WAITING TIME” cannot be set when the “WORKING TIME” is “ON”.

The 2nd line of the “WORKING TIME”:

0M 3M 6M 9M ... 57M

The 1st line of the “WAITING TIME”:

0H 1H 2H 3H ... 12H

The 2nd line of the “WAITING TIME”:

	0M 3M	6M 9M ... 57M

6.Once the setting is completed...

Press the EXIT button several times to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

Setting the time

WORKING TIME

Set the length of time the “INVERSE/WT” mode lasts. When the WORKING TIME is set to “ON”, the “INVERSE/WT” mode stays in the on state.

WAITING TIME

Set the length of time until the “INVERSE/WT” mode starts.

*The “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.

To select “ON” for the “WORKING TIME”...

Set the hours of the WORKING TIME to 0H and the minutes to 0M. “ON” will be displayed.

Setting the time for “SCREEN WIPER”

Set the “SCREEN WIPER” operation time, “WAITING TIME”, and “SPEED”.

Example: Setting the SCREEN WIPER mode to start in 30 minutes and proceeds for one and a half hours.

1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the PROCEED button.

The “FUNCTION” screen appears.

2.Use the ▲ and ▼ buttons to select “LONG LIFE”, then press the MENU/ENTER button.

3.Use the ▲ and ▼ buttons to select “SCREEN WIPER”, then use the and buttons to select “ON”.

L O N G L I F E

PLE	:	AUTO
ORBITER	:	OFF
INVERSE	:	OFF
	:	ON
SCREEN WIPER	:	ON

SEL. MENU/ENTER OK EXIT RETURN

4. Press the MENU/ENTER button.

The “SCREEN WIPER” screen appears.

S C R E E N W I P E R

WORKING TIME			:	ON
SPEED			:	1
SEL.	ADJ.					RETURN
SEL.	ADJ.				EXIT	RETURN

5.Adjust the time and speed using the and buttons and the ▲ and ▼ buttons.

The mode switches as follows each time the and button is pressed.

S C R E E N W I P E R

WORKING TIME			:	1H
			:	30M
WAITING TIME			:	0H
			:	30M
SPEED			:	1
SEL.	ADJ.					RETURN
SEL.	ADJ.				EXIT	RETURN

The 1st line of the “WORKING TIME”:

0H 1H 2H 3H ... 12H

*The “WORKING TIME” (minutes) and “WAITING TIME” cannot be set when the “WORKING TIME” is “ON”.

34

Image 40

Contents Owner’s Guide Page Precautions Important InformationTo avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Basic Operations InformationTo set the off timer To cancel the off timerAfter the power is turned off with the off timer To check the remaining timeWide Operations Watching with a wide screen manualWhen Picture Size is set to OFF Information Supported resolutionPicture Size setting Watching computer imagesOperations in the Side-by-side mode PIP Screen OperationsShowing a couple of pictures on the screen at the same time InformationSelecting the input signals to be displayed Operations in the Picture-in-picture modeAdjusting the ON-SCREEN Menu controls On Screen Menu Controls Menu OperationsMain menu Sub menu Functions Default Picture Settings Menu Adjusting the pictureInformation Video Settings screen Adjusting the computer imageExample Setting the Theater mode Information Types of picture modesSetting the color temperature Example Setting LOWOnce the setting is completed Information Setting the color temperatureExample Adjusting the White Balance Adjusting the color to the desired qualityInformation Adjusting the white balance Reducing noise in the picture Example Setting NR-3Types of noise reduction Audio Settings Menu Adjusting the treble, bass and left/right balanceExample Adjusting the bass Information Sound settings menuExample Adjusting the vertical position in the normal mode Monitor Settings MenuInformation When Auto Picture is OFF Example Turning the on-screen menu mode off Setting the on-screen menuFunction Menu Adjusting the position of the menu display Example Adjusting the position of the menu displayTo adjust the position Information Adjusting the position of the menu displaySetting the power management for computer images ExampleTurning the power management function onInformation Power management function Power management settingsPOWER/STANDBY indicator Setting the gray level for the sides of the screen Setting the picture to suit the movieExample Adjusting the Gray Level Example Setting the Cinema Mode to OFFSetting Monitorlink M-LINK ADJ Example SettingInformation When you adjust the M-LINK ADJ Example Setting PLE to LockSetting the time for Inverse Peak Luminance Enhancement PLEInformation Setting the time Setting the time for Screen WiperTo select on for the Working Time Resetting to the default values SpeedOptions Setting Menu Setting the allocation of the audio connectorsSetting the BNC connectors Example Setting Audio 1 to VideoSetting a computer image to the correct RGB select screen Example Setting the RGB Select mode to MotionTo set the RGB select mode to Motion See page 55 for the details of the above settingsSetting the picture size for RGB input signals Setting high definition images to the suitable screen sizeInformation HD Select modes Setting the language for the menus Example Setting the menu display to DeutschInformation Language settings Information MenuSetting the video signal format Example Setting the video signal format to 3.58 NtscInformation Video signal formats To select 3.58 NtscExternal Control ApplicationConnections Communication FormatCommand Reference List Power onPower OFF Input Switch ChangeVolume Gain Data Audio Mute OnAudio Mute Off Contrast Gain DataColor Gain Data Picture Mode SelectRED Gain Data NR Mode Set Green Gain DataBlue Gain Data Bass Gain DataScreen Mode Select Balance Gain Data22. V. Position Gain Data 23. H. Position Gain DataPhase Gain Data Auto Picture SelectClock Gain Data Menu SelectPower MGT Select Cinema Mode SetMenu ADJ. Gain Data Gray Level SetScreen Wiper Set Inverse SetAudio Select Set RGB Select HD SelectPicture Size Select Language SelectColor System Select Multi Screen SelectFrequency Request Input Mode RequestHorizontal sync polarity Video ADJ Request Audio Select Request Failure Mode RequestModel Name Request Supported resolution Table of Signals SupportedComputer input signals supported by this system Page Troubleshooting Symptom Checks RemedySpecifications SignalsPage Mitsubishi Plasma Display Panel Limited Warranty