Mitsubishi Electronics PD-5010 manual Setting the time for Inverse, Peak Luminance Enhancement PLE

Page 39

5. Once the setting is completed...

Press the EXIT button to return to the FUNCTION menu.

To exit the main menu, press the EXIT button twice.

Information

PEAK LUMINANCE ENHANCEMENT (PLE)

AUTO ............. The brightness of the screen is

adjusted automatically to suit the picture quality.

LOCK ............. The brightness level is set to

minimum.

ORBITER

OFF	Orbiter mode does not function.
ON	The picture gradually moves around
	the screen to reduce the impact of
	uneven aging.

INVERSE

OFF	Inverse mode does not function.
ON	The picture is displayed alternately
	between positive image and negative
	image.
	You can set the time by pressing the
	MENU/ENTER button while “ON”
	is set.
WT	The entire screen turns white.
	You can set the time by pressing the
	MENU/ENTER button while “ON”
	is set.

SCREEN WIPER

OFF	Screen wiper mode does not function.
ON	Repeatedly moves the white vertical
	bar from the left end of the screen to
	the right end at a constant speed.
	You can set the time by pressing the
	MENU/ENTER button while “ON”
	is set.

Restoring the factory default settings

To restore the original factory settings, go back to the MAIN MENU. Select “FUNCTION,”and then select “RESET”. Note that this also restores other settings to the factory defaults.

*The PLE and ORBITER can only be adjusted when an RGB signal is displayed.

Setting the time for “INVERSE”

Set the “INVERSE” or “WHITE” display time and the “WAITING TIME”.

Example: Setting so that the INVERSE mode cycles on for 90 minutes and off for 30 minutes.

1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the MENU/ENTER button.

The “FUNCTION” screen appears.

2.Use the ▲ and ▼ buttons to select “LONG LIFE”, then press the MENU/ENTER button.

3.Use the ▲ and ▼ buttons to select “INVERSE”, then use the and buttons to select “ON”.

L O N G L I F E

PLE			:	AUTO
ORBITER			:	OFF
INVERSE			:	ON

SCREEN WIPER			:	OFF

SEL. MENU/ENTER OK EXIT RETURN

4.Press the MENU/ENTER button. The “INVERSE/WT” screen appears.

I N V E R S E / W T

WORKING TIME :ON

SEL.

ADJ.

EXIT

RETURN

5.Adjust the time using the and buttons and the ▲ and ▼ buttons.

The mode switches as follows each time the ▲ or ▼ button is pressed.

I N V E R S E / W T

WORKING TIME	:	1H
	:	30M
WAITING TIME	:	0H
	:	30M

SEL.

ADJ.

EXIT

RETURN

The 1st line of the “WORKING TIME”:

ON or 0H 1H 2H 3H ... 12H

33

Image 39

Contents Owner’s Guide Page Important Information PrecautionsTo avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Information Basic OperationsTo check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerWatching with a wide screen manual Wide OperationsWatching computer images When Picture Size is set to OFFInformation Supported resolution Picture Size settingInformation Operations in the Side-by-side modePIP Screen Operations Showing a couple of pictures on the screen at the same timeOperations in the Picture-in-picture mode Selecting the input signals to be displayedAdjusting the ON-SCREEN Menu controls Menu Operations On Screen Menu ControlsMain menu Sub menu Functions Default Adjusting the computer image Picture Settings MenuAdjusting the picture Information Video Settings screenInformation Types of picture modes Example Setting the Theater modeInformation Setting the color temperature Setting the color temperatureExample Setting LOW Once the setting is completedAdjusting the color to the desired quality Example Adjusting the White BalanceInformation Adjusting the white balance Example Setting NR-3 Reducing noise in the pictureTypes of noise reduction Information Sound settings menu Audio Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bassMonitor Settings Menu Example Adjusting the vertical position in the normal modeInformation When Auto Picture is OFF Setting the on-screen menu Example Turning the on-screen menu mode offFunction Menu Information Adjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the positionPower management settings Setting the power management for computer imagesExampleTurning the power management function on Information Power management functionPOWER/STANDBY indicator Example Setting the Cinema Mode to OFF Setting the gray level for the sides of the screenSetting the picture to suit the movie Example Adjusting the Gray LevelExample Setting PLE to Lock Setting Monitorlink M-LINK ADJExample Setting Information When you adjust the M-LINK ADJPeak Luminance Enhancement PLE Setting the time for InverseSetting the time for Screen Wiper Information Setting the timeTo select on for the Working Time Speed Resetting to the default valuesExample Setting Audio 1 to Video Options Setting MenuSetting the allocation of the audio connectors Setting the BNC connectorsSee page 55 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionSetting high definition images to the suitable screen size Setting the picture size for RGB input signalsInformation HD Select modes Information Menu Setting the language for the menusExample Setting the menu display to Deutsch Information Language settingsTo select 3.58 Ntsc Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc Information Video signal formatsCommunication Format External ControlApplication ConnectionsInput Switch Change Command Reference ListPower on Power OFFContrast Gain Data Volume Gain DataAudio Mute On Audio Mute OffPicture Mode Select Color Gain DataRED Gain Data Bass Gain Data NR Mode SetGreen Gain Data Blue Gain Data23. H. Position Gain Data Screen Mode SelectBalance Gain Data 22. V. Position Gain DataMenu Select Phase Gain DataAuto Picture Select Clock Gain DataGray Level Set Power MGT SelectCinema Mode Set Menu ADJ. Gain DataInverse Set Screen Wiper SetAudio Select Set Language Select RGB SelectHD Select Picture Size SelectMulti Screen Select Color System SelectInput Mode Request Frequency RequestHorizontal sync polarity Video ADJ Request Failure Mode Request Audio Select RequestModel Name Request Table of Signals Supported Supported resolutionComputer input signals supported by this system Page Symptom Checks Remedy TroubleshootingSignals SpecificationsPage Mitsubishi Plasma Display Panel Limited Warranty