Mitsubishi Electronics PD-5010 manual Resetting to the default values, Speed

Page 41

The 2nd line of the “WORKING TIME”:

0M 3M 6M 9M ... 57M￿

The 1st line of the “WAITING TIME”:

0H 1H 2H 3H ... 12H ￿

The 2nd line of the “WAITING TIME”:

0M 3M 6M 9M ... 57M￿

“SPEED”

1 2 3 4 5￿

6. Once the setting is completed...

Press the EXIT button several times to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

￿Setting the time

WORKING TIME

Set the length of time the “SCREEN WIPER” mode lasts.

When the WORKING TIME is set to “ON”, the “SCREEN WIPER” mode stays in the ”ON” state.

WAITING TIME

Set the length of time until the “SCREEN WIPER” mode starts.

SPEED

Set the moving speed for the “SCREEN WIPER”. The speed decreases as the number increases.

*The “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.

￿To select “ON” for the “WORKING TIME”...

Set the hours of the WORKING TIME to 0H and the minutes to 0M. “ON” will be displayed.

Resetting to the default values

Use these operations to restore all the picture adjustments and audio settings to the factory default values.

Refer to page 19 for items to be reset.

Press the MENU/ENTER button on the remote control to

display the MAIN MENU on the screen, then...

1.Use the and buttons to select “FUNCTION”, then press the MENU/ENTER button.

The “FUNCTION” screen appears.

2.Use the and buttons to select “RESET”, then press the MENU/ENTER button.

F U N C T I O N

MENU

:

ON

MENU ADJ.

:

1

 

 

POWER MGT

:

OFF

GRAY LEVEL

:

3

 

 

CINEMA MODE

:

ON

M-LINK ADJ.

:

1

 

 

LONG LIFE

 

 

 

 

RESET

 

 

 

 

SEL.

 

OK

 

 

RETURN

MENU/ENTER

 

EXIT

The “RESET” screen appears.

3.Use the and buttons to select “RESET”, then press the MENU/ENTER button.

R E S E T

RESET

RETURN

MENU/ENTER OK EXIT RETURN

R E S E T

S E T T I N G N OW

When the “SETTING NOW” screen disappears, the screen will be restored to the previous “RESET” mode, then all the settings are restored to the default values.

4.Once the setting is completed ...

Press the EXIT button.

To delete the main menu, press the EXIT button once more.

35

Image 41
Contents Owner’s Guide Page Important Information PrecautionsTo avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Information Basic OperationsTo cancel the off timer To set the off timerAfter the power is turned off with the off timer To check the remaining timeWatching with a wide screen manual Wide OperationsInformation Supported resolution When Picture Size is set to OFFPicture Size setting Watching computer imagesPIP Screen Operations Operations in the Side-by-side modeShowing a couple of pictures on the screen at the same time InformationAdjusting the ON-SCREEN Menu controls Operations in the Picture-in-picture modeSelecting the input signals to be displayed Menu Operations On Screen Menu ControlsMain menu Sub menu Functions Default Adjusting the picture Picture Settings MenuInformation Video Settings screen Adjusting the computer imageInformation Types of picture modes Example Setting the Theater modeExample Setting LOW Setting the color temperatureOnce the setting is completed Information Setting the color temperatureInformation Adjusting the white balance Adjusting the color to the desired qualityExample Adjusting the White Balance Types of noise reduction Example Setting NR-3Reducing noise in the picture Adjusting the treble, bass and left/right balance Audio Settings MenuExample Adjusting the bass Information Sound settings menuInformation When Auto Picture is OFF Monitor Settings MenuExample Adjusting the vertical position in the normal mode Function Menu Setting the on-screen menuExample Turning the on-screen menu mode off Example Adjusting the position of the menu display Adjusting the position of the menu displayTo adjust the position Information Adjusting the position of the menu displayExampleTurning the power management function on Setting the power management for computer imagesInformation Power management function Power management settingsPOWER/STANDBY indicator Setting the picture to suit the movie Setting the gray level for the sides of the screenExample Adjusting the Gray Level Example Setting the Cinema Mode to OFFExample Setting Setting Monitorlink M-LINK ADJInformation When you adjust the M-LINK ADJ Example Setting PLE to LockPeak Luminance Enhancement PLE Setting the time for InverseTo select on for the Working Time Setting the time for Screen WiperInformation Setting the time Speed Resetting to the default valuesSetting the allocation of the audio connectors Options Setting MenuSetting the BNC connectors Example Setting Audio 1 to VideoExample Setting the RGB Select mode to Motion Setting a computer image to the correct RGB select screenTo set the RGB select mode to Motion See page 55 for the details of the above settingsInformation HD Select modes Setting high definition images to the suitable screen sizeSetting the picture size for RGB input signals Example Setting the menu display to Deutsch Setting the language for the menusInformation Language settings Information MenuExample Setting the video signal format to 3.58 Ntsc Setting the video signal formatInformation Video signal formats To select 3.58 NtscApplication External ControlConnections Communication FormatPower on Command Reference ListPower OFF Input Switch ChangeAudio Mute On Volume Gain DataAudio Mute Off Contrast Gain DataRED Gain Data Picture Mode SelectColor Gain Data Green Gain Data NR Mode SetBlue Gain Data Bass Gain DataBalance Gain Data Screen Mode Select22. V. Position Gain Data 23. H. Position Gain DataAuto Picture Select Phase Gain DataClock Gain Data Menu SelectCinema Mode Set Power MGT SelectMenu ADJ. Gain Data Gray Level SetAudio Select Set Inverse SetScreen Wiper Set HD Select RGB SelectPicture Size Select Language SelectMulti Screen Select Color System SelectHorizontal sync polarity Input Mode RequestFrequency Request Video ADJ Request Model Name Request Failure Mode RequestAudio Select Request Computer input signals supported by this system Table of Signals SupportedSupported resolution Page Symptom Checks Remedy TroubleshootingSignals SpecificationsPage Mitsubishi Plasma Display Panel Limited Warranty