Mitsubishi Electronics PD-5010 manual Example Setting the Theater mode

Page 27

Setting the picture mode according to the brightness of the room

There are four picture modes that can be used effectively according to the environment in which you are viewing the display.

Example: Setting the “THEATER” mode

Press the MENU/ENTER button on the remote control to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “VIDEO SETTINGS”, then press the MENU/ENTER button.

The “VIDEO SETTINGS” screen appears.

2.Use the ▲ and ▼ buttons to select “PICTURE MODE”.

	V I D E O S E T T I N G S
	CONTRAST
	BRIGHTNESS
	BRIGHTNESS
	SHARPNESS
	SHARPNESS
	COLOR
	COLOR
	TINT
	TINT			R				G

	PICTURE MODE			: MEMORY
	COLOR TEMP.			: MEDIUM
	NR			: OFF
	SEL.	ADJ.				RETURN
	SEL.	ADJ.			EXIT	RETURN

3.To set to “THEATER” ...

Use the and buttons to select “THEATER”.

The mode switches as follows when the and buttons are pressed:

MEMORY THEATER NORMALRESET

PICTURE MODE :THEATER

*If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.

4.Once the adjustment is completed ...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

Information

Types of picture modes

MEMORY ........ The last picture adjustments are stored

here.

THEATER ....... Set this mode when watching video in

a dark room.

This mode provides darker, finer pictures, like the screen in movie theaters.

CONTRAST = 80% for RESET mode BRIGHTNESS = 95% for RESET mode

NORMAL ........ Set this mode when watching video in

a bright room.

This mode provides dynamic pictures with distinct differences between light and dark sections.

CONTRAST = 96% for RESET mode RESET............ Use this to reset the picture to the

factory default settings. No adjustments to contrast, brightness, sharpness, color or tint can be made in this mode.

21

Image 27

Contents Owner’s Guide Page Important Information PrecautionsTo avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Information Basic OperationsTo check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerWatching with a wide screen manual Wide OperationsWatching computer images When Picture Size is set to OFFInformation Supported resolution Picture Size settingInformation Operations in the Side-by-side modePIP Screen Operations Showing a couple of pictures on the screen at the same timeOperations in the Picture-in-picture mode Selecting the input signals to be displayedAdjusting the ON-SCREEN Menu controls Menu Operations On Screen Menu ControlsMain menu Sub menu Functions Default Adjusting the computer image Picture Settings MenuAdjusting the picture Information Video Settings screenInformation Types of picture modes Example Setting the Theater modeInformation Setting the color temperature Setting the color temperatureExample Setting LOW Once the setting is completedAdjusting the color to the desired quality Example Adjusting the White BalanceInformation Adjusting the white balance Example Setting NR-3 Reducing noise in the pictureTypes of noise reduction Information Sound settings menu Audio Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bassMonitor Settings Menu Example Adjusting the vertical position in the normal modeInformation When Auto Picture is OFF Setting the on-screen menu Example Turning the on-screen menu mode offFunction Menu Information Adjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the positionPower management settings Setting the power management for computer imagesExampleTurning the power management function on Information Power management functionPOWER/STANDBY indicator Example Setting the Cinema Mode to OFF Setting the gray level for the sides of the screenSetting the picture to suit the movie Example Adjusting the Gray LevelExample Setting PLE to Lock Setting Monitorlink M-LINK ADJExample Setting Information When you adjust the M-LINK ADJPeak Luminance Enhancement PLE Setting the time for InverseSetting the time for Screen Wiper Information Setting the timeTo select on for the Working Time Speed Resetting to the default valuesExample Setting Audio 1 to Video Options Setting MenuSetting the allocation of the audio connectors Setting the BNC connectorsSee page 55 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionSetting high definition images to the suitable screen size Setting the picture size for RGB input signalsInformation HD Select modes Information Menu Setting the language for the menusExample Setting the menu display to Deutsch Information Language settingsTo select 3.58 Ntsc Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc Information Video signal formatsCommunication Format External ControlApplication ConnectionsInput Switch Change Command Reference ListPower on Power OFFContrast Gain Data Volume Gain DataAudio Mute On Audio Mute OffPicture Mode Select Color Gain DataRED Gain Data Bass Gain Data NR Mode SetGreen Gain Data Blue Gain Data23. H. Position Gain Data Screen Mode SelectBalance Gain Data 22. V. Position Gain DataMenu Select Phase Gain DataAuto Picture Select Clock Gain DataGray Level Set Power MGT SelectCinema Mode Set Menu ADJ. Gain DataInverse Set Screen Wiper SetAudio Select Set Language Select RGB SelectHD Select Picture Size SelectMulti Screen Select Color System SelectInput Mode Request Frequency RequestHorizontal sync polarity Video ADJ Request Failure Mode Request Audio Select RequestModel Name Request Table of Signals Supported Supported resolutionComputer input signals supported by this system Page Symptom Checks Remedy TroubleshootingSignals SpecificationsPage Mitsubishi Plasma Display Panel Limited Warranty