Mitsubishi Electronics PD-5010 manual Picture Settings Menu, Adjusting the picture

Page 26

Picture Settings Menu

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be adjusted as desired.

Example: Adjusting the contrast

Press the MENU/ENTER button on the remote control to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “VIDEO SETTINGS”, then press the MENU/ENTER button. The “VIDEO SETTINGS” screen appears.

2.Use the ▲ and ▼ buttons to select “CONTRAST”.

	V I D E O S E T T I N G S
	CONTRAST
	CONTRAST

	BRIGHTNESS
	SHARPNESS
	SHARPNESS
	COLOR
	COLOR
	TINT
	TINT			R				G

	PICTURE MODE			: MEMORY
	COLOR TEMP.			: MEDIUM
	NR			: OFF
	SEL.		ADJ.			RETURN
	SEL.		ADJ.		EXIT	RETURN

3. Use the or buttons to adjust the contrast.

CONTRAST

*If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears.

4.Once the adjustment is completed ...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Note: If “CAN NOT ADJUST” appears ...

When trying to enter the VIDEO SETTINGS submenu, make sure PICTURE MODE is not set to RESET.

Information

VIDEO SETTINGS screen

CONTRAST	Changes the picture’s contrast.
BRIGHTNESS ..	Changes the picture’s brightness.
SHARPNESS ....	Changes the picture’s sharpness.
	Adjusts picture detail of VIDEO
	display.
COLOR	Changes the color density.
TINT	Changes the picture’s tint. Adjust for
	natural colored skin, background, etc.

Adjusting the computer image

Only the contrast and brightness can be adjusted when a computer signal is connected.

Restoring the factory default settings

Select “RESET” under the “PICTURE MODE” settings.

20

Image 26

Contents Owner’s Guide Page Precautions Important InformationTo avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Basic Operations InformationAfter the power is turned off with the off timer To set the off timerTo cancel the off timer To check the remaining timeWide Operations Watching with a wide screen manualPicture Size setting When Picture Size is set to OFFInformation Supported resolution Watching computer imagesShowing a couple of pictures on the screen at the same time Operations in the Side-by-side modePIP Screen Operations InformationAdjusting the ON-SCREEN Menu controls Operations in the Picture-in-picture modeSelecting the input signals to be displayed On Screen Menu Controls Menu OperationsMain menu Sub menu Functions Default Information Video Settings screen Picture Settings MenuAdjusting the picture Adjusting the computer imageExample Setting the Theater mode Information Types of picture modesOnce the setting is completed Setting the color temperatureExample Setting LOW Information Setting the color temperatureInformation Adjusting the white balance Adjusting the color to the desired qualityExample Adjusting the White Balance Types of noise reduction Example Setting NR-3Reducing noise in the picture Example Adjusting the bass Audio Settings MenuAdjusting the treble, bass and left/right balance Information Sound settings menuInformation When Auto Picture is OFF Monitor Settings MenuExample Adjusting the vertical position in the normal mode Function Menu Setting the on-screen menuExample Turning the on-screen menu mode off To adjust the position Adjusting the position of the menu displayExample Adjusting the position of the menu display Information Adjusting the position of the menu displayInformation Power management function Setting the power management for computer imagesExampleTurning the power management function on Power management settingsPOWER/STANDBY indicator Example Adjusting the Gray Level Setting the gray level for the sides of the screenSetting the picture to suit the movie Example Setting the Cinema Mode to OFFInformation When you adjust the M-LINK ADJ Setting Monitorlink M-LINK ADJExample Setting Example Setting PLE to LockSetting the time for Inverse Peak Luminance Enhancement PLETo select on for the Working Time Setting the time for Screen WiperInformation Setting the time Resetting to the default values SpeedSetting the BNC connectors Options Setting MenuSetting the allocation of the audio connectors Example Setting Audio 1 to VideoTo set the RGB select mode to Motion Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion See page 55 for the details of the above settingsInformation HD Select modes Setting high definition images to the suitable screen sizeSetting the picture size for RGB input signals Information Language settings Setting the language for the menusExample Setting the menu display to Deutsch Information MenuInformation Video signal formats Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc To select 3.58 NtscConnections External ControlApplication Communication FormatPower OFF Command Reference ListPower on Input Switch ChangeAudio Mute Off Volume Gain DataAudio Mute On Contrast Gain DataRED Gain Data Picture Mode SelectColor Gain Data Blue Gain Data NR Mode SetGreen Gain Data Bass Gain Data22. V. Position Gain Data Screen Mode SelectBalance Gain Data 23. H. Position Gain DataClock Gain Data Phase Gain DataAuto Picture Select Menu SelectMenu ADJ. Gain Data Power MGT SelectCinema Mode Set Gray Level SetAudio Select Set Inverse SetScreen Wiper Set Picture Size Select RGB SelectHD Select Language SelectColor System Select Multi Screen SelectHorizontal sync polarity Input Mode RequestFrequency Request Video ADJ Request Model Name Request Failure Mode RequestAudio Select Request Computer input signals supported by this system Table of Signals SupportedSupported resolution Page Troubleshooting Symptom Checks RemedySpecifications SignalsPage Mitsubishi Plasma Display Panel Limited Warranty