Mitsubishi Electronics DX-TL2500U Flowchart for connection and settings, Auto SET UP

Flowchart

■Flowchart for connection and settings

Installation example :

This is an example operational flowchart of the following : making connections at the rear of the terminal ; setting HDD mode to PARTITION ; making default settings ; making an Alarm recording with Timer mode ; searching recorded data with ALARM LIST SEARCH ; using playback, and copying to a Compact Flash Card.

Connection to the terminals on the back Connection to the terminals on the back

• Connection to the terminals on the back.

See “■ Connecting to CCTV camera, monitor, sensor”, page 19.

• Connection to the alarm recording.

See “■ Alarm Recording Connection”, page 20 and “■ Rear View” , pages 17, 18.

• Connection to the terminals on the back.

See “■ Connecting to CCTV camera, monitor, sensor”, page 19.

• Connection to the alarm recording.

See “■ Alarm Recording Connection”, page 20 and “■ Rear View” , pages 17, 18.

The unit is booted

AUTO SET UP

• Setting the auto set up.

See “■ AUTO SET UP”, pages 21, 22.

Only when the unit is turned on for the first time, the <AUTO SET UP> screen is displayed automatically. It is not automatically displayed after next time.

Selecting the “YES” in “PERFORM AUTO SET UP?” setting.

Recording

The unit is booted

AUTO SET UP

• Setting the auto set up.

See “■ AUTO SET UP”, pages 21, 22.

Only when the unit is turned on for the first time, the <AUTO SET UP> screen is displayed automatically. It is not automatically displayed after next time.

Selecting the “NO” in “PERFORM AUTO SET UP?” setting.

Making the HDD REC SETTING

•Setting the PARTITION. “♦PARTITION/PARTITION SIZE” default settings “NORMAL” } “PARTITION”.

See “♦PARTITION/PARTITION SIZE”, page 84.

Changing the initial menu settings

• Setting the language.

See “■ LANGUAGE SELECTION”, page 30.

• Setting the present time and screen display.

See “<TIME DATE/DISPLAY SETTINGS>”, pages 37-39.

• Setting the present time.

See “♦TIME DATE ADJUST”, pages 25, 26.

• Setting the display mode.

See “■ DISPLAY MODE”, page 37.

• Setting the audio recording.

See “■ AUDIO RECORDING”, page 56 and “■ Continuous recording time table”, pages 92, 93.

Setting the HDD (hard disk drive) mode

• Setting the repeat recording.

See “♦HDD REPEAT REC MAIN/HDD

REPEAT REC SUB”, page 53.

• Setting the remain HDD capacity.

See “♦REMAIN HDD”, page 57.

• Setting the call out.

See “• HDD MAIN REMAIN/HDD SUB REMAIN/ARCHIVE REMAIN”, page 58 and “• HDD MAIN FULL/HDD SUB FULL/

ARCHIVE FULL”, page 58.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••

12