Mitsubishi Electronics DX-TL2500U Initial SET UP/INFORMATION, Sequential Play, Play see

<INITIAL SET UP/INFORMATION> (continued)

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “IM-CHECK PLAY” in the <HDD SETTINGS> screen. Display the desired setting and confirm.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

3.Select the device for alteration check and then start playback.

Warning will also be displayed for parts where recorded data is damaged.

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “SEQUENTIAL PLAY” in the <HDD SETTINGS> screen. Display the desired setting and confirm.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

3.Press the PLAY button.

4.Press one of the camera number buttons with recorded video.

•Single screen sequential playback starts.

IMAGE MODIFIED( 1 2 3 )

When performing complex playback operations with the SHUTTLE ring (one picture at a time), dur- ing alteration check, the “IMAGE MODIFIED” warn- ing may appear. Use the DVR’s normal playback mode if this occurs.

♦SEQUENTIAL PLAY

It is possible to make a copy of the recorded video to an analogue video recorder, etc.. This function is done play- ing back the video of each camera in their REC order in full screen. During single screen sequential playback, the SPLIT/SEQUENCE button will light. Use REV. PLAY to slow playback.

	<HDD	SETTINGS>	MAIN	ON
	HDD	REPEAT REC
	HDD	REPEAT REC	SUB	OFF
	HDD	REPEAT PLAY		OFF
	IM-CHECK PLAY			OFF
	>>SEQUENTIAL PLAY			OFF
#1	FIFO OVERWRITE		MODE	OFF
#2	ARCHIVE SOURCE		HDD	MAIN
#1	ARCHIVE START POSITION RESET

#1.Appears when “ARCHIVE•COPY” is set to ID4•ID5 on the screen.

#2.Appears when “PARTITION” is set and “ARCHIVE•COPY” is set to ID4•ID5 respectively on the screen.

Setting ( default : “OFF” )

“ON” : Plays back the video in the single screen se- quential mode.

“OFF” : Does not play back the video in the single screen sequential mode.

Playback is performed during camera sequen- tial play at an interval of 30P. To change the play-

back interval, press the PLAY button (or the REV. PLAY button)( see “Changing playback intervals, pages 73, 74).

When performing camera sequential playback for video with long recording intervals, the video of the largest camera number selected for recording will be played back the longest.

Only the camera number (title) of the pressed camera number button is displayed. Other camera number (titles) will not be displayed. If display is not necessary, select “NONE” in the <CAMERA DIS-

PLAY> ( see page 37).

■ARCHIVE

♦FIFO OVERWRITE MODE

This function can be set to make repeated archive while deleting parts of previous data in HDD for recording con- nected to ID4.

<HDD	SETTINGS>	ON
HDD	REPEAT REC MAIN
HDD	REPEAT REC SUB	OFF
HDD REPEAT PLAY		OFF
IM-CHECK PLAY		OFF
SEQUENTIAL PLAY		OFF
>>FIFO OVERWRITE MODE		OFF
ARCHIVE SOURCE HDD		MAIN

ARCHIVE START POSITION RESET

This setting appears when “ARCHIVE• COPY” is selected on “ID4•ID5” of the <INITIALIZATION> screen, and HDD for recording is connected to ID4.

Confirm that the ARCHIVE device is correctly connected to ID4 before making FIFO OVERWRITE MODE settings.

Settings ( default : “OFF” )

“ON” : Perform repeated archive to HDD connected to ID4.

“OFF” : Do not perform repeated archive to HDD connected to ID4.

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “FIFO OVERWRITE MODE” in the <HDD SETTINGS> screen.

2.Turn the SHUTTLE ring clockwise twice when the cursor is on the left next to “FIFO OVERWRITE MODE”.

•The first turn inverts the “OFF” setting display, and the second makes it flash with a red background.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••••

54