Various search (continued)
■ALARM LIST SEARCH
This unit stores the start time of alarm recording and emer- gency recording in the alarm list when such recording be- gins. It is also possible to index search the desired time (or the closest time) from the list of alarm recording (emer- gency recording) start times stored in the alarm list.
Up to 10,000 alarm recording (emergency re- cording) start times can be stored and displayed.
In the alarm list, items with the ALARM IN termi- nal on the rear grounded are indicated in white, items that were detected with motion are indicated in green and items with the EMERGENCY terminal grounded are indicated in red.
To clear the alarm list, erase the data in the <MAIN HDD DATA CLEAR> and <SUB HDD DATA CLEAR> screen. Beware that executing it erases all the data of HDD contained the video data. Alarm recording then will be stored again from 00001.
1.Press the SEARCH button.
•The search screen selected in the “SEARCH TYPE” ( 
see page 75 ) appears.
<SEARCH SELECTION> | ALARM LIST | |||
>>SEARCH TYPE | ||||
SELECTION CAMERA NUMBER | ALL | |||
DATE/TIME | - - |
| : | : |
PLAYBACK DEVICE |
|
| MAIN | |
MAIN |
|
|
|
|
START | 00:00:00 | |||
END | 12:30:15 | |||
|
|
|
|
|
The Alarm list may take time to display completely when there are many list items or the HDD has been expanded.
2.(When the desired search screen is not displayed on the screen • • • )
Change the above “SEARCH TYPE” setting and display the “ALARM LIST SEARCH” screen.
•To display the emergency recording start time in the alarm list, set “SELECTION CAMERA NUMBER” in the <SEARCH SELECTION> screen to “ALL”. “EMR” indicating emergency recording will appear in the place of the camera number in the alarm list.
<ALARM LIST SEARCH>
>>00004
PUSH SEARCH KEY
“Camera of alarm input” displays the camera number which activated the alarm signals, and “record camera” displays the camera number which started recording.
When a cameras picking up an alarm signal is not set to record, the recorded video will be stored in the lowest number (active) camera.
When executing on “ALARM LIST SEARCH” function and the “PARTITION” active, set “PLAY- BACK DEVICE” to “SUB”.
3.Select the desired alarm list number.
•
button/turn JOG dial counterclockwise : Selection moves to the next number.
•
button/turn JOG dial clockwise : Selection moves to the previous number.
•
button : Displays the page with date prior to the date of the currently opened page.
•
button : Displays the page with date newer than the date of the currently opened page.
•To cancel search, press the SEARCH button twice.
The camera number written by the start index signal of the
When setting “HDD REPEAT REC MAIN” to “OFF” or “STANDBY”, “HDD REPEAT REC SUB” to “OFF” and there is an alarm recording (emergency recording) at the end of the HDD, that recording may not be stored in the alarm list and that number may become missing and not displayed.
When an alarm recording (emergency record- ing) is performed when displaying of the <ALARM LIST SEARCH> screen, exit the <ALARM LIST SEARCH> screen and display the screen again. The new item will be added to the list.
When using “DATE/TIME” in the <SEARCH SE- LECTION> screen, the number of list items dis- played on the screen can be narrowed down.
1.Press the SEARCH button to display the <SEARCH SELECTION> screen.
2.Set the desired date and time of the result in “DATE/TIME” and confirm.
3.Turn the SHUTTLE ring counterclockwise once to display
4.Select the desired alarm list number and turn the SHUTTLE ring clockwise to confirm.
•To cancel the search, press the SEARCH button twice.
•After performing alarm search, the screen will be in the single screen display with 
see page 75 ) or selecting an individual camera number.
5.Playback the search result.
•Press either the PLAY (REV. PLAY) or PAUSE button.
6.To stop playback or
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••• | • |
78