5.Check to see that the cursor is to the left of program number “1” and turn the SHUTTLE ring clockwise twice.
•The “DW” display reverses in color when the SHUTTLE ring is turned for the first time. When the ring is turned for the second time, the background turns red and flashes.
6.Turn the JOG dial to display “SPL” in “DW” and turn the SHUTTLE ring clockwise.
•The setting is confirmed and flashing stops.
If you select the wrong day of the week in error, turn the SHUTTLE ring clockwise, use the JOG dial to display the correct day of the week and turn the SHUT- TLE ring clockwise again.
7.Turn the JOG dial clockwise to move the reversed display to the “hour” of the start time and turn the SHUTTLE ring clockwise.
•The background of the “hour” of the START changes to red and flashes.
8.Turn the JOG dial to display “12” in the “hour” and turn the SHUTTLE ring clockwise.
•The setting is confirmed and flashing stops.
9.Repeat steps 7 and 8 to set “30” in “minutes” of the start time and “13” in the “hour” and “00” in the “minutes” of the end time, and then confirm.
16.Turn the JOG dial to display “WED” in start day and turn the SHUTTLE ring clockwise.
•The setting is confirmed and flashing stops.
17.Turn the JOG dial clockwise to move the reversed display to the end day and turn the SHUTTLE ring clockwise.
•The background of the end day setting turns red and flashes.
18.Turn the JOG dial to display “SAT” in end day and turn the SHUTTLE ring clockwise.
•The setting is confirmed and flashing stops.
<TIMER PROGRAM> |
| P2 | ||
1 | DW | START END MODE | MD | |
SPL | 12:30 13:00 A | ON | ||
2 | - | |||
3 | - | |||
4 | - | |||
5 | - | |||
6 | - | |||
7 | - | |||
8 | - | |||
>>SPL |
|
| ||
19.Turn the SHUTTLE ring counterclockwise or press the SET UP button to exit.
•Turn the SHUTTLE ring counterclockwise to return the cursor to the previous operation. Then, press the SET UP button to clear the <TIMER PROGRAM SETTINGS> screen and return to the normal screen.
10.Turn the JOG dial clockwise to move the reversed display to the “MODE” and turn the SHUTTLE ring clockwise.
•The background of the “MODE” setting turns red and flashes.
11.Turn the JOG dial to display “A” in “MODE” and turn the SHUTTLE ring clockwise.
•The setting is confirmed and flashing stops.
12.Turn the JOG dial clockwise to move the reversed display to the “MD” and turn the SHUTTLE ring clockwise.
•The background of the “MD” setting turns red and flashes.
13.Turn the JOG dial to display “ON” in “MD” and turn the SHUTTLE ring clockwise.
•The setting is confirmed and flashing stops.
14.When input timer reservations in other program number, repeat steps 5 ~ 13.
15.Turn the JOG dial to select “SPL” and turn the SHUTTLE ring clockwise twice.
•The start day display reverses in color when the SHUTTLE ring is turned for the first time. When the ring is turned for the second time, the background turns red and flashes.
If there is an unset item in the program line (- - -
display), the setting screen cannot be exited even when turning the SHUTTLE ring counterclockwise. In this case, set all unset items.
20.Press the TIMER button.
•The TIMER indicator lights.
•Timer recording starts if the current time is within the timer reservation time frame.
•The power turns off and recording will be in the
•Timer recording/timer recording standby can be cancelled by pressing the TIMER button again for more than 1 second.
Not available during alarm recording.
To delete program contents, or to exit the program without performing settings, press the WARNING RE- SET button during program setting.
INFORMATION
Recording will not be performed if there is an error in the setting. To help in such situation, the table below provides information ob error and countermeasure when errors are encountered in Timer recording.
| Unit status | Description of error |
| Countermeasure |
| Page |
|
| TIMER indicator flashes. | 1) The date/time is not set. | 1) | Set the date/time. |
| 25, 26 |
|
| Series of short beeps | 2) Timer reservation setting has not been | 2) | Set the correct reservation. |
| 50, 51 |
|
| set to operate. | 3) | Check the settings. |
| 50, 51 |
| |
| will sound. | 3) Program is currently being set. |
|
|
|
|
|
|
|
|
|
|
|
| |
| Timer recording is not | • “HDD REPEAT REC MAIN” is set to “OFF” | • Press the WARNING RESET button for |
| 96 |
| |
| performed even when | or “STANDBY”, or “HDD REPEAT REC SUB” | canceling the warning. |
|
|
| |
| the timer recording | is set to “OFF”. There is no HDD space left | • Set to “ON” in the “HDD REPEAT REC MAIN” | 53 |
| ||
| time is reached. | of HDD(MAIN) or HDD(SUB). | or “HDD REPEAT REC SUB” when “OFF” is |
|
|
| |
|
|
| selected. |
|
|
| |
|
|
| • Press the REC button when “STANDBY” is |
| 53 |
| |
|
|
| selected on the “HDD REPEAT REC MAIN”. |
|
|
| |
|
|
|
|
|
|
| |
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations | ||||||
51