Mitsubishi Electronics DX-TL2500U operation manual Language Selection, To change the Password

5.Input the 4 digits of the PASSWORD by pressing the camera number buttons or the ZOOM button.

•The cursor moves to the left side of the setting “2”.

When the PASSWORD LOCK of level 1 and 2 are set, if you unlock level 1 the PASSWORD LOCK of level 2 will still be active.

When the PASSWORD LOCK of level 1 and 2 are set, level 2 only can not be unlocked. Be sure to un- lock level 1 first.

Input the PASSWORD correctly. If there is an error in input, repeat steps 4 and 5 to input again.

6.Turn the JOG dial to move the cursor to “EXECUTE” and turn the SHUTTLE ring clockwise.

•The normal screen is returned.

7.( To unlock the PASSWORD for level 3 • • • )

Press the SET UP button.

•The <UNLOCK PASSWORD> screen appears.

<UNLOCK PASSWORD>

3----

PRESS CAMERA BUTTON TO ENTER

PASSWORD

To change the PASSWORD • • •

1.Unlock the PASSWORD of level 1 to 3 to display the <PASSWORD SETTING> screen.

2-1. (To change the PASSWORD for level 1 to 3 • • • ) Display the <PASSWORD SETTING> (level 1 to level 3) screen. Turn the JOG dial to move the cursor to desired level to change the PASSWORD number and press the WARNING RESET button.

•The PASSWORD in “FIRST” and “SECOND” are cleared to appear “- - - -”.

<PASSWORD SETTING>

FIRST SECOND

>>1

2

3

PRESS WARNING RESET BUTTON

TO CLEAR PASSWORD

SHUTTLE>>:TO SET PASSWORD

2-2. Input the new PASSWORD referring to “To register the PASSWORD • • •” .

3-1. (To change the PASSWORD for level 4 • • • )

Display the <PASSWORD> screen. Turn the JOG dial to move the cursor to cursor to “HDD DATA CLEAR”, and turn SHUTTLE ring clockwise.

• The <CHANGE PASSWORD> screen appears.

3-2. Input the 4 digits of the PASSWORD number by pressing the camera number buttons or the ZOOM button.

•The PASSWORD LOCK is unlocked and DATA CLEAR screen appears.

When the PASSWORD LOCK of level 1, 2 and 3 are set, the PASSWORD LOCK of level 2 will be active in case of unlocking level 1 , and level 3 will be active in case of unlocking levels 1 and 2.

When the PASSWORD LOCK of level 1, 2 and 3 are set, level 3 only can not be unlocked. Be sure to unlock levels 1 and 2 too.

3-3. Press the WARNING RESET button.

•The PASSWORD in “FIRST” and “SECOND” are cleared to appear “- - - -”.

3-4. Input the new PASSWORD referring to “To register the PASSWORD • • •” .

Changing from PASSWORD LOCK mode to SIMPLE LOCK mode • • •

8.Input the 4 digits of the PASSWORD number by pressing the camera number buttons or the ZOOM button.

•The PASSWORD LOCK is unlocked and turns off the LOCK indicator.

Press the LOCK button to return to the normal screen without input PASSWORD.

9. ( To unlock the PASSWORD for level 4 • • • )

Set “MAIN HDD DATA CLEAR” or “SUB HDD DATA CLEAR” at the <INFORMATION/SERVICE> (1/2) screen.

•The <UNLOCK PASSWORD> screen appears.

<UNLOCK PASSWORD>

4----

10.Input the 4 digits of the PASSWORD number by pressing the camera number buttons or the ZOOM button.

•The PASSWORD LOCK is unlocked and DATA CLEAR screen appears.

To lock the PASSWORD • • •

1.Press the LOCK button using a ballpoint pen, etc., when the MAIN switch is set to ON.

•The PASSWORD LOCK is applied and the LOCK indicator lights.

1.Unlock the PASSWORD of level 1 to 3 to display the <PASSWORD SETTING> screen.

<PASSWORD SETTING>

FIRST SECOND

>>1

2

3

PRESS WARNING RESET BUTTON

TO CLEAR PASSWORD

SHUTTLE>>:TO SET PASSWORD

2.Confirm the cursor is at the left side of level 1 and press the WARNING RESET button.

•The PASSWORD in “FIRST” and “SECOND” are cleared to appear “- - - -”.

3.Turn the JOG dial to move the cursor to level 3 after level 2 press the WARNING RESET button.

•The PASSWORD of all levels are changed to display “- - - -”.

4.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

■LANGUAGE SELECTION

See Page 30.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

65