Mitsubishi Electronics DX-TL2500U Features, Built-in duplex 16 channel multiplexer, Recording

Page 8

Features

Built-in duplex 16 channel multiplexer

The screen mode can be switched on the monitor such as single screen, split4, split9 and split16 screen and

sequential screen, split4 sequential screen and split9 sequential screen. ( see page 41)

The unit is equipped with the 2 type-output connector to display the different mode split screen on the each of

different monitors. ( see page 42)

Convenient simultaneous recording-playback function. Live picture from all cameras can be recorded con- tinuously while the recording of desired camera is played back.

The unit can neither record nor display on the monitor the camera image legally prohibited.

Recording

• Recording rate 60 pps ( picture per second )

60 pps recording which is becoming the industrial standard is available on the 16 ch unit. 3 pps recording per each camera is also available even using 16 cameras.

Built-in 240GB HDD. Optional additional storage is available. ( see page 21)

The maximum capacity of peripheral recording device is 12TB. (2TB (1 peripheral recording device con-

nected through SCSI interface) x 6 HDDs) ( see page 21)

Various record setting

Recording interval and picture quality of each camera can be set individually to both normal recording and

alarm recording. ( see pages 47-49)

• Flexible alarm recording

Any camera number for alarm recording of 2 modes such as Alarm and Alarm Plus can be assigned. 4 triggers are also selectable out of various combination such as external alarm input and motion detection, external

alarm input or motion detection, only external alarm input or only motion detection. ( see pages 47-49)

• Partition recording

Alarm images can be recorded in a designated area within HDD to keep alarm images longer term than normal

recording. The partition area can be set from 10% to 90% of HDD capacity. ( see page 84)

• Mirror recording

Mirror recording for prevention against data loss in case of HDD crash. ( see pages 82, 83)

Built-in motion detection

Detection area of 192 (12 x 16) dots. ( see pages 45, 46)

• Wavelet compression

Wavelet method with compression of higher-rate than JPEG.

1ch PCM audio recording. ( see page 56)

Network

From the personal computer connected to Internet using the Microsoft Internet Explorer, the image screen

such as live images, search and playback image can be displayed. ( see pages 86-91)

• LAN application software

Optional software with high-quality communication functions.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

•••••••••••••

8

Image 8
Contents DX-TL2500U Page Avertissement Important safeguards Damage requiring Service Replacement PartsSafety Check ServicingProtect the Power Cord When not in use always turn OFF the Main switchRecordable time and product warranty Features Built-in duplex 16 channel multiplexerRecording NetworkWired Remote Controller Optional Ease of usePTZ camera control Auto set-upContents 67-71 73,7475-79 80,81Auto SET UP FlowchartFlowchart for connection and settings Setting other various functions Setting the motion detectionSetting the timer recording Timer recording is executed/completedMajor operations and their functions SET UP button Analogue OUT connectorsAlarm Interrupt button Power buttonMajor operations and their functions Main switch Camera OUT connectorsCamera in connectors Audio connectorsConnections Connecting to Cctv camera, monitor, sensorPower Cord Connections Alarm Recording ConnectionConnecting peripheral recording devices Connections /AUTO SET UP Auto SET UPSetting is confirmed and flashing stops Perform Auto SET UP? is displayed on the screenAuto SET UP / Initial settings When the setting is complete, press the Power buttonInitialization ID4ID5Initial settings HDD SettingBoot UP Delay Setting of Boot UP Delay default 30SEthernet connector Scsi connectorRS-232C connector Multiplexer functions Menu settingsBasic Operations Daylight SAVING/DAYLIGHT Setting Default SUN, 1ST, APRTime Date Adjust To return to the normal screen from a menu screenTime is indicated using the 24-hour system Basic OperationsPresent time display Recorded capacity display functionScreen see page 53, the REC mode settings are made Timer Program Settings screen seeBasic manual recording Shuttle ring clockwise as shown belowPress the Play button Basic playbackBack repeatedly see HDD Repeat PLAY, Basic search Time Date SearchTo pause playback, press the Pause button To stop playback, press the Stop buttonFor playback, see Various playback func- tions, pages 73 Language SelectionTo playback the searched image Press either the Play button or the Pause buttonMenu Setting Menu functionsSUB Menu Main MenuSET UP Menu functionsOperations Main Menu SUB Menu REC/STOP + Power button English JOG Select Shuttleexecute Language SelectionCopy Menu Search Selection MenuTime Date Adjust Display ModeCamera TITLE/MEMO Setting Clock Location SettingCamera TITLE/MEMO Setting 1/2 Camera TITLE/MEMO Setting 2/2Display returns to the Camera TITLE/MEMO Setting screen Repeat steps 2 ~ 7 to input Counter in the camera numberDuplex Mode Display Setting default BottomPlexer can also be found on see Camera number button operationsSPLIT/SEQUENCE button operations Available modesOutput B SPLIT4 Screen Setting screen Is displayed using SPLIT4 displayOutput B indicator illuminates Activated via the Alarm recording start flashingMPX Display Settings MPX Display SettingsSPLIT4 Screen Setting To set the multiplexer setting of the OutputSPLIT9 Screen Setting SPLIT16 Screen SettingSequence Setting Sequence Setting 1/23 , 4 , 5 , 6 , 7 10 , 11 , 12 , 13 Sequence Setting 2/2Interlace Detection Mask Setting & active setting changes to inactive settingSelection Camera Number Button 15Motion Detection Settings Test ModeSensitivity Motion ThresholdSettings concerning normal recording and alarm recording Details concerning pre-alarm recording, seeAlarm Setting 1/2 Alarm Setting 2/2Record Settings PRE Alarm RECPre-alarm recording can be set Picture quality for normal recording pages 27Alarm REC Duration Recording time during alarm recording can be setMotion DET REC Archive OverwriteTimer Program Settings Timer ProgramStructure of the Timer Program screen Timer Program screen appearsPress the Timer button Background of the end day setting turns red and flashesBackground of the Mode setting turns red and flashes Background of the MD setting turns red and flashesTimer Program Settings Holiday SettingCerning recording mode settings, see pages 27, 28 Overlapping Timer settingsHDD Settings HDD Repeat REC Main HDD Repeat REC SUB Operation when HDD Hard Disk Drive space is fullHDD Repeat Play IM-CHECK PlayInitial SET UP/INFORMATION Archive Fifo Overwrite ModeSequential Play Play seeArchive Start Position Reset Archive Start Position Reset screen is displayedArchive Point is reset Archive Source HDDKEY Sound Rear Terminal Settings Mode OUT 1 ~ Mode OUTAudio Recording Setting of Device default Main Setting of Remain HDD default 10%Buzzer Remain HDDCommunication Port Settings Call OUT SettingsHDD Main REMAIN/HDD SUB REMAIN/ Archive Remain Emergency REC DurationSettings RS-232CMode EthernetService Port Setting Alarm Notification SettingSetting of Warning default OFF Mail AddressINFORMATION/SERVICE Setting of Alarm Sens default OFFSetting of REC Mode default OFF Setting of Retry Time default 10SHDD Information screen is displayed ARCHIVE/COPY Information screen is displayedPassword Reset to Factory SettingsPassword Lock Data ClearTo register the Password To unlock the PasswordInput the Password entered in First in Second Repeat steps 2-2 ~ 2-4 to set level 2To change the Password Changing from Password Lock mode to Simple Lock modeTo lock the Password Language SelectionQuick Settings This unit can save or load Menu settings storedTo update menu settings of this unit To save menu settings of this unit to a Compact Flash CardSetting Operation examplesOperation example OperationTimer Program screen setting see pages 50 This example uses the holiday settingHDD Settings screen setting see pages Operation examplesFollowing day Emergency REC Duration 20MREC Mode C screen setting see REC Mode D screen setting seeAlarm Setting D screen setting see Record Setting D screen setting seeRecord for 24HOURS Archive Archive Media Auto EjectPRE Alarm Recordings Pre-alarm recordingVarious recordings Emergency RecordingsVarious playback functions Press the REV. Play Reverse Playback button Monitor display settings and playback operationSimultaneous playback during recording Various search Search SelectionSearch Type DATE/TIMEIndex SEARCH/ALARM Index Search Various searchTime Date Search See pages 29Alarm Skip Search Alarm Skip Search In the case of forward directionPress either the Play REV. Play or Pause button Alarm List SearchSelect the desired alarm list number START/END Search Search screen selected in above Search Type appearsMaking Copy/Restore Display the desired setting in Mode and confirmDisplay the desired setting in Transfer Period and confirm Copy screen appearsCopy restore operation is executed Copying from unit to videotapeSee Sequential PLAY, Video Cord Audio CordPower failure compensation circuit Power failure reset recordingHDD Setting Other convenient functionsPoints to be aware of regarding Mirror mode Points to be aware of regarding Partition mode Partition Size setting appears on the Initialization screenOther convenient functions PARTITION/PARTITION SizeCovert Camera Setting Alarm DisplayCovert Camera Setting 1/2 Covert Camera Setting 2/2Authentication Communications by Web BrowserCommunications by Web Browser Personal computer product requirementsWelcome Live monitorSelect the desired Menu and left-click Select live monitor and left-clickCommunications by Web Browser PlaybackUser maintenance Alarm SearchIndex Search Time SearchThis screen, assign Log out settings to end the job UserLog out Change log in userLogged in user is changed and the Welcome screen appears Recording time table Continuous recording time tableHDD continuous recording time for 240GB drive Without Audio recordingCompact Flash Card continuous recording time for 64MB SuperTroubleshooting Description of problem Please consult the followingOthers ARCHIVE/SIZE/ Data Error ARCHIVE/FULL REC/REMSystem Error Glossary GlossarySpecifications 872C276A0