Mitsubishi Electronics DX-TL2500U Settings concerning normal recording and alarm recording

Page 47

<RECORD SETTINGS>

■Settings concerning normal recording and alarm recording

This unit allows per camera independent settings for nor- mal recording and alarm recording. By this, more detailed settings are possible such as changing the recording inter- vals of the camera inputting the alarm signals while main- taining the normal recording settings of normal cameras.

Certain settings and mode changes are limited during Alarm recording. Pressing the ALARM INTER- RUPT button halts additional alarm inputs, and stops recording.

During recording, the setting in the <RECORD SETTING> screen cannot be changed.

When the cameras for recording has no input video signal, a warning display of “NO SIGNAL” ap-

pears (for details, see “Warnings and CALL OUT output” pages 96, 97).

■Recording mode settings for normal recording and alarm recording

Setting of the camera number for normal recording and alarm recording, the TRIGGER for alarm recording, the recording in- tervals and recording picture quality for normal recording and alarm recording and whether to perform pre-alarm recording for alarm recording can be set here (for normal recording, see “Basic manual recording” pages 27, 28). Pre-alarm record- ing is a function to start recording before the ALARM IN termi- nal on the rear of the unit is grounded or motion is detected (for

details concerning pre-alarm recording, see page 72).

<RECORD SETTINGS>

 

>>ALARM SETTING

 

RECORD SETTING

5S

ALARM REC DURATION

MOTION DET REC

ALARM

ARCHIVE OVERWRITE

OFF

ARCHIVE MEDIA AUTO EJECT

OFF

1.Press the SET UP button } <SETTINGS> } Select “ALARM SETTING” in the <RECORD SETTINGS> screen and turn the SHUTTLE ring clockwise.

•The <ALARM SETTING> screen appears.

<ALARM SETTING> 1/2

<ALARM SETTING>

TRIGGER

ALARM

RECORD CAMERA

>>1

1 ---------------

EXT

2

-2--------------

EXT

3

-- 3 -------------

EXT

4

---4------------

EXT

5

----5-----------

EXT

6

-----

6 ----------

EXT

7

------

7 ---------

EXT

8

-------

8 --------

EXT

9

--------

9 -------

EXT

NEXT PAGE

SHUTTLE<<:BACK

<ALARM SETTING> 2/2

<ALARM SETTING>

TRIGGER

ALARM

RECORD CAMERA

>>10

---------10------

EXT

11

----------11-----

EXT

12

-----------12----

EXT

13

------------13---

EXT

14

-------------14--

EXT

15

--------------15-

EXT

16

---------------16

EXT

EMR

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

 

SHUTTLE<<:BACK

The <ALARM SETTING> screen consists of 2 pages. The second page is displayed by turning the JOG dial to move the cursor to “NEXT PAGE”, and turn the SHUTTLE ring clockwise.

2.(When setting the alarm recording camera and trigger • • • ) Turn the JOG dial to select the desired alarm camera channel number and turn the SHUTTLE ring clockwise.

•The first item from the left side in the “ALARM RECORD CAMERA” setting display reverses in color.

•The camera numbers are lined in order of the number from

“ 1 ” to “ 16 ”.

• Multiple cameras can be entered to record when trigger.

When you turn the JOG dial counterclockwise, the camera number setting or the TRIGGER setting will reverses in color in order such as 1 , EXT, 16 , 15 • • • .

3.Turn the JOG dial to display the desired camera number reversed in color and turn the SHUTTLE ring clockwise.

•The background of setting turns red and flashes.

While the setting is flashing, the setting screen can- not be exited even when pressing the SET UP button.

4.Turn the JOG dial to display the desired setting and turn the SHUTTLE ring clockwise.

•The setting is confirmed and flashing stops. Multiple camera numbers can be selected for one alarm camera channel number.

5.Turn the JOG dial clockwise to display “TRIGGER” setting reversed in color and turn the SHUTTLE ring clockwise.

•The background of setting turns red and flashes.

6.Turn the JOG dial to display the desired setting and turn the SHUTTLE ring clockwise.

•The setting is confirmed and flashing stops.

•Setting of “TRIGGER” ( default : “EXT” )

“EXT” : Alarm recording can only be started when the ALARM IN terminal is grounded.

“MD&EXT” : Alarm recording can be started when the ALARM IN terminal is grounded and the motion is detected simultaneously.

“MD/EXT” : When the ALARM IN terminal is grounded or motion is detected alarm recording is started.

“MD” : Alarm recording can only be started when the motion is detected.

When you select and set the “TRIGGER” setting to MD, MD/EXT or MD&EXT, the motion detection function will be active and any setting changes can not be accepted. Please use the ALARM INTER- RUPT button to change the setting.

7.When the setting is complete, turn the SHUTTLE ring counterclockwise.

•The cursor moves to the camera number on the left.

•When continuing with other camera number settings, turn the JOG dial to move the cursor to the desired camera number and repeat steps 2 ~ 7 to perform the settings.

8.(When setting the camera selection during alarm recording • • • ) Press the SET UP button } <SETTINGS> } Select “RECORD SETTING” in the <RECORD SETTINGS> screen and turn the SHUTTLE ring clockwise.

•The <RECORD SETTING> screen appears.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents DX-TL2500U Page Avertissement Important safeguards Servicing Damage requiring ServiceReplacement Parts Safety CheckWhen not in use always turn OFF the Main switch Protect the Power CordRecordable time and product warranty Network FeaturesBuilt-in duplex 16 channel multiplexer RecordingAuto set-up Wired Remote Controller OptionalEase of use PTZ camera controlContents 80,81 67-7173,74 75-79Auto SET UP FlowchartFlowchart for connection and settings Timer recording is executed/completed Setting other various functionsSetting the motion detection Setting the timer recordingMajor operations and their functions Power button SET UP buttonAnalogue OUT connectors Alarm Interrupt buttonMajor operations and their functions Audio connectors Main switchCamera OUT connectors Camera in connectorsConnections Connecting to Cctv camera, monitor, sensorPower Cord Connections Alarm Recording ConnectionConnecting peripheral recording devices Perform Auto SET UP? is displayed on the screen Connections /AUTO SET UPAuto SET UP Setting is confirmed and flashing stopsID4ID5 Auto SET UP / Initial settingsWhen the setting is complete, press the Power button InitializationSetting of Boot UP Delay default 30S Initial settingsHDD Setting Boot UP DelayEthernet connector Scsi connectorRS-232C connector Multiplexer functions Menu settingsBasic Operations To return to the normal screen from a menu screen Daylight SAVING/DAYLIGHT SettingDefault SUN, 1ST, APR Time Date AdjustRecorded capacity display function Time is indicated using the 24-hour systemBasic Operations Present time displayShuttle ring clockwise as shown below Screen see page 53, the REC mode settings are madeTimer Program Settings screen see Basic manual recordingPress the Play button Basic playbackBack repeatedly see HDD Repeat PLAY, To stop playback, press the Stop button Basic searchTime Date Search To pause playback, press the Pause buttonPress either the Play button or the Pause button For playback, see Various playback func- tions, pages 73Language Selection To playback the searched imageMain Menu Menu SettingMenu functions SUB MenuMenu functions SET UPOperations Main Menu SUB Menu English JOG Select Shuttleexecute Language Selection REC/STOP + Power buttonSearch Selection Menu Copy MenuClock Location Setting Time Date AdjustDisplay Mode Camera TITLE/MEMO SettingRepeat steps 2 ~ 7 to input Counter in the camera number Camera TITLE/MEMO Setting 1/2Camera TITLE/MEMO Setting 2/2 Display returns to the Camera TITLE/MEMO Setting screenSetting default Bottom Duplex Mode DisplayAvailable modes Plexer can also be found on seeCamera number button operations SPLIT/SEQUENCE button operationsActivated via the Alarm recording start flashing Output B SPLIT4 Screen Setting screenIs displayed using SPLIT4 display Output B indicator illuminatesTo set the multiplexer setting of the Output MPX Display SettingsMPX Display Settings SPLIT4 Screen SettingSequence Setting 1/2 SPLIT9 Screen SettingSPLIT16 Screen Setting Sequence Setting3 , 4 , 5 , 6 , 7 10 , 11 , 12 , 13 Sequence Setting 2/2Interlace Button 15 Detection Mask Setting& active setting changes to inactive setting Selection Camera NumberMotion Threshold Motion Detection SettingsTest Mode SensitivityAlarm Setting 2/2 Settings concerning normal recording and alarm recordingDetails concerning pre-alarm recording, see Alarm Setting 1/2Picture quality for normal recording pages 27 Record SettingsPRE Alarm REC Pre-alarm recording can be setArchive Overwrite Alarm REC DurationRecording time during alarm recording can be set Motion DET RECTimer Program screen appears Timer Program SettingsTimer Program Structure of the Timer Program screenBackground of the MD setting turns red and flashes Press the Timer buttonBackground of the end day setting turns red and flashes Background of the Mode setting turns red and flashesOverlapping Timer settings Timer Program SettingsHoliday Setting Cerning recording mode settings, see pages 27, 28IM-CHECK Play HDD Settings HDD Repeat REC Main HDD Repeat REC SUBOperation when HDD Hard Disk Drive space is full HDD Repeat PlayPlay see Initial SET UP/INFORMATIONArchive Fifo Overwrite Mode Sequential PlayArchive Source HDD Archive Start Position ResetArchive Start Position Reset screen is displayed Archive Point is resetKEY Sound Rear Terminal Settings Mode OUT 1 ~ Mode OUTAudio Recording Remain HDD Setting of Device default MainSetting of Remain HDD default 10% BuzzerEmergency REC Duration Communication Port SettingsCall OUT Settings HDD Main REMAIN/HDD SUB REMAIN/ Archive RemainEthernet SettingsRS-232C ModeMail Address Service Port SettingAlarm Notification Setting Setting of Warning default OFFSetting of Retry Time default 10S INFORMATION/SERVICESetting of Alarm Sens default OFF Setting of REC Mode default OFFARCHIVE/COPY Information screen is displayed HDD Information screen is displayedData Clear PasswordReset to Factory Settings Password LockRepeat steps 2-2 ~ 2-4 to set level 2 To register the PasswordTo unlock the Password Input the Password entered in First in SecondLanguage Selection To change the PasswordChanging from Password Lock mode to Simple Lock mode To lock the PasswordTo save menu settings of this unit to a Compact Flash Card Quick SettingsThis unit can save or load Menu settings stored To update menu settings of this unitOperation SettingOperation examples Operation exampleOperation examples Timer Program screen setting see pages 50This example uses the holiday setting HDD Settings screen setting see pagesEmergency REC Duration 20M Following dayRecord Setting D screen setting see REC Mode C screen setting seeREC Mode D screen setting see Alarm Setting D screen setting seeArchive Archive Media Auto Eject Record for 24HOURSEmergency Recordings PRE Alarm RecordingsPre-alarm recording Various recordingsVarious playback functions Press the REV. Play Reverse Playback button Monitor display settings and playback operationSimultaneous playback during recording DATE/TIME Various searchSearch Selection Search TypeSee pages 29 Index SEARCH/ALARM Index SearchVarious search Time Date SearchAlarm Skip Search In the case of forward direction Alarm Skip SearchPress either the Play REV. Play or Pause button Alarm List SearchSelect the desired alarm list number Search screen selected in above Search Type appears START/END SearchCopy screen appears Making Copy/RestoreDisplay the desired setting in Mode and confirm Display the desired setting in Transfer Period and confirmVideo Cord Audio Cord Copy restore operation is executedCopying from unit to videotape See Sequential PLAY,Other convenient functions Power failure compensation circuitPower failure reset recording HDD SettingPoints to be aware of regarding Mirror mode PARTITION/PARTITION Size Points to be aware of regarding Partition modePartition Size setting appears on the Initialization screen Other convenient functionsCovert Camera Setting 2/2 Covert Camera SettingAlarm Display Covert Camera Setting 1/2Personal computer product requirements AuthenticationCommunications by Web Browser Communications by Web BrowserSelect live monitor and left-click WelcomeLive monitor Select the desired Menu and left-clickPlayback Communications by Web BrowserTime Search User maintenanceAlarm Search Index SearchChange log in user This screen, assign Log out settings to end the jobUser Log outLogged in user is changed and the Welcome screen appears Without Audio recording Recording time tableContinuous recording time table HDD continuous recording time for 240GB driveSuper Compact Flash Card continuous recording time for 64MBDescription of problem Please consult the following TroubleshootingOthers ARCHIVE/FULL REC/REM ARCHIVE/SIZE/ Data ErrorSystem Error Glossary GlossarySpecifications 872C276A0
Top Page Image Contents