Mitsubishi Electronics DX-TL2500U operation manual Specifications

Specifications

Rated Power Supply:

Rated Input:

Color System:

Operating Temperature:

Relative Humidity:

Altitude:

Dimensions:

Weight:

Recording System

Sampling

Data Compression

Compression Unit

Resolution

Recording Device

Video Input:

Monitor Output:

Throughout Output:

Audio Input:

Audio Output:

Microphone Input:

Timer Program:

Memory Backup:

CONNECTORS

ALARM IN(1-16) Input:

CLOCK ADJ Input:

REC Input:

EMERGENCY Input:

GND:

MODE OUT(1-5) Output:

DC 5V OUT Output:

CALL OUT/CALL OUT GND: RS-485/RS-422

Rating:

MODE OUT(1-5)

ALARM IN / CLOCK ADJ / REC/EMERGENCY

CALL OUT /

CALL OUT GND

RS-232C

SCSI

ETHERNET

AC 100-240V 50/60Hz

0.65- 0.3A (100-240V) NTSC type color system.

41° F-104°F (5° C to 40° C). Max.80(%)

Max.2000(m)

425(Width) x 375(Depth) x 118(Height)(mm). 8.2kg

Digital recording method using WAVELET compression. 13.5MHz

WAVELET Field

684 x 240 240GB HDD

16 Input BNC-Connector:	1.0 V(p-p), 75 ohms.
S-Connector:	Y-Signal: 1.0 V(p-p), 75 ohms.
	C-Signal: 0.286 V(p-p), 75 ohms.
2 Output BNC-Connector:	1.0 V(p-p), 75 ohms.
RCA-Pinplug:	1.0 V(p-p), 75 ohms.
16 Output BNC-Connector:	1.0 V(p-p), 75 ohms.
RCA-Pinplug:	308 mV(rms), 50 kohms.
2 Output RCA-Pinplug:	308 mV(rms), 1 kohms.
Ø 3.5mm stereo minijack:	0.346 mV(rms), 600 ohms.

8 programs-Daily start and stop time for one week x 3set. Lasts for more than 1 month.

Terminal for starting alarm recording. Terminal for adjusting clock. Terminal for start recording.

Terminal for start emergency recording. Terminal for ground.

Terminal for indication of recording selected mode. Terminal for DC 5V OUT. Max. Drive current 30mA DC. Terminal for external warning device.

Terminal for operations of pan, tilt and zoom of a dome camera.

Active:	“Low” Level.	Max. Drive current 7mA DC.
Non active:	Open.	Max. Voltage +24V DC.
Active:	When terminals are short-circuited
	or “Low” Level voltage is applied.
Non active:	Open.
Active:	ON.	Max. Drive current 7mA DC.
Non active:	Open.	Max. Voltage +24V DC.

RS-232C (D-SUB 9pin) connector for connection with personal computer. SCSI2 (Half pitch 50 pin ) connector.

Connector form:	RJ-45
Physical interface:	10BASE-T

Accessories

AC power cord

COMPACT FLASH slot cover (mounted on unit)

Compact Flash Card recording format CD-R/RW recording format

1(The supplied power cord is used for 120V only. Never connect to any outlet or power supply having a different voltage or frequency.)

1

Original format (FSM2)

Original format (FSM2)

Weight and dimensions shown are approximate.

Design and specifications are subject to change without notice.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Specifications

99