Mitsubishi Electronics DX-TL2500U HDD Settings HDD Repeat REC Main HDD Repeat REC SUB

<INITIAL SET UP/INFORMATION>

■HDD SETTINGS

♦HDD REPEAT REC MAIN/

HDD REPEAT REC SUB

Operation when HDD (Hard Disk Drive) space is full.

	<HDD SETTINGS>	MAIN	ON
	>>HDD REPEAT REC
	HDD REPEAT REC	SUB	OFF
	HDD REPEAT PLAY		OFF
	IM-CHECK PLAY		OFF
	SEQUENTIAL PLAY		OFF
#1	FIFO OVERWRITE	MODE	OFF
#2	ARCHIVE SOURCE	HDD	MAIN
#1	ARCHIVE START POSITION RESET

#1.Appears when “ARCHIVE•COPY” is set to ID4•ID5 on the screen.

#2.Appears when “PARTITION” is set and “ARCHIVE•COPY” is set to ID4•ID5 respectively on the screen.

“HDD REPEAT REC SUB” appears when “PAR- TITION” is selected on “HDD SETTING” of the <INI- TIALIZATION> screen.

Setting ( default of HDD REPEAT REC MAIN : “ON”, de-

fault of HDD REPEAT REC SUB : “OFF”)

“ON” : Automatically returns to the beginning of the HDD and resumes recording (by overwriting old data).

“STANDBY” : When the HDD space becomes FULL, recording is stopped and the unit switches to the standby mode. Recording is resumed when the REC terminal is grounded or the REC button is pressed. Recording is temporarily stopped if the alarm input is continuously grounded or during timer recording. Then, recording is resumed from the beginning of the HDD.

“OFF” : Recording is stopped and “REC/FULL” or “REC/SUB FULL” is displayed on the screen. To resume recording, press the WARNING RESET button to cancel the warning display and press the REC button.

When an error occurs with a HDD, only the HDD with the warning is affected, all other drives with no

warning will continue to record.

“STANDBY” is displayed only in “HDD REPEAT REC MAIN”.

♦HDD REPEAT PLAY

The contents recorded on the HDD (Hard Disk Drive) can be repeatedly played back.

	<HDD SETTINGS>	ON
	HDD REPEAT REC MAIN
	HDD REPEAT REC SUB	OFF
	>>HDD REPEAT PLAY	OFF
	IM-CHECK PLAY	OFF
	SEQUENTIAL PLAY	OFF
#1	FIFO OVERWRITE MODE	OFF
#2	ARCHIVE SOURCE HDD	MAIN
#1	ARCHIVE START POSITION RESET

#1.Appears when “ARCHIVE•COPY” is set to ID4•ID5 on the screen.

#2.Appears when “PARTITION” is set and “ARCHIVE•COPY” is set to ID4•ID5 respectively on the screen.

Setting ( default : “OFF” )

“ON” : After the recorded data is played back to the end, playback is resumed by automatically return- ing to the beginning of the recorded data.

“OFF” : After the recorded data is played back to the end, playback is stopped.

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “HDD REPEAT PLAY” in the <HDD SETTINGS> screen. Display the desired setting and confirm.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button to exit.

♦IM-CHECK PLAY

This function is to check whether alterations have been made to the recorded video or the recording date/time. “IMAGE MODIFIED” warning is displayed when alteration is found.

	<HDD	SETTINGS>	MAIN	ON
	HDD	REPEAT REC
	HDD	REPEAT REC	SUB	OFF
	HDD	REPEAT PLAY		OFF
	>>IM-CHECK PLAY			OFF
	SEQUENTIAL PLAY			OFF
#1	FIFO OVERWRITE		MODE	OFF
#2	ARCHIVE SOURCE		HDD	MAIN
#1	ARCHIVE START POSITION RESET

#1.Appears when “ARCHIVE•COPY” is set to ID4•ID5 on the screen.

#2.Appears when “PARTITION” is set and “ARCHIVE•COPY” is set to ID4•ID5 respectively on the screen.

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “HDD REPEAT REC MAIN” or “HDD REPEAT REC SUB” in the <HDD SETTINGS> screen. Display the desired setting and confirm.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

Setting ( default : “OFF” )

“ON” : Alteration check is performed during play- back and displays a warning at the point containing alteration.

“OFF” : Alteration check is not performed.

This function may cause problems during re- cording and playback. Normally, set this function to “OFF”.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

53