Mitsubishi Electronics DX-TL2500U Copying from unit to videotape, See Sequential PLAY

Setting ( default : “START•END” )

“START•END” : Sets the recording start/end date/ time.

“START” : Sets the recording start date/time.

“LATEST DATA” : Starts copying from the end point according to the available memory in the COPY device.

6.Set the desired copy (restore) start date and time to “START” and confirm.

7.(When setting “START•END” in step 5 • • • )

Set the desired copy (restore) end date and time to “END” and confirm.

8.Select “EXECUTE” and turn the SHUTTLE ring clockwise.

•The copy (restore) operation is executed.

•If the copy (restore) operation does not start, turn the SHUTTLE ring counterclockwise or press the COPY button.

The “COPY/NO MEDIA” warning is displayed when executing COPY or RESTORE without a Compact Flash Card inserted in the slot, or no DDS, RDD media is inserted in the device.

If the copy range exceeds the available ca- pacity of the Compact Flash Card, DDS media or RDD media, “COPY/SIZE/DATA ERROR” warning will appear on the screen when copying

( see pages 96, 97). When this case occurs, set a narrower copy range or insert a Card, DDS media or RDD media with larger capacity.

If a data with no date is included in the copy range, “COPY/SIZE/DATA ERROR” warning will ap- pear on the screen.

When there is no data to restore in the Com- pact Flash Card, DDS media or RDD media, “REST/ SIZE/DATA ERROR” warning will appear on the screen when restoring.

A “REST/MEDIA ERROR” error is displayed when executing RESTORE from a non-FSM2 Com- pact Flash Card.

For usable Compact Flash Card, check with your dealer or place of purchase.

For the recordable time when copying to a Com-

pact Flash Card, see page 93.

The image data is processed and copied in 1MB blocks.

■Copying from unit to videotape

Data can be copied to a VCR tape even when the unit is recording. For recording of the VCR, see the instruction manual of the analog video cassette recorder.

DIGITAL RECORDER DX-TL2500

SPLIT/

SEQUENCE

ZOOM
	OUTPUT B	TIMER	PRE ALARM M-DET EMERGENCY ACCESS
0
POWER	TIMER VIDEO OUT AUDIO OUT		COMPACT FLASH

To VIDEO OUT	To AUDIO OUT
terminal	terminal
VIDEO CORD	AUDIO CORD
(commercially	(commercially
available cable)	available cable,
	if necessary)
To VIDEO IN	To AUDIO IN
terminal	terminal

ANALOGUE VIDEO CASSETTE RECORDER

1.[Analogue video cassette recorder] Prepare the unit for recording.

•First, set the input source of the VCR to the external (from VCR).

2.[This unit] Press the SPLIT/SEQUENCE button to select

the screen type to play back ( see page 41).

•Single screen, SPLIT4 (a, b, c and d) screen, SPLIT9 (a, b) screen and SPLIT16 screen can be selected.

It is also possible to copy the video of each cam- era in order using single screen sequential playback

( see “SEQUENTIAL PLAY”, page 54).

3.[This unit] Use the search function to move to the beginning

of the video to copy ( see “START/END SEARCH”, page 79).

4.[Analogue video cassette recorder] Start recording.

5.[This unit] Press the PLAY button to start playback.

6.To stop copying, press the STOP button of this unit. After stopping playback, stop the recording on the analogue video cassette recorder.

Video recorded on VCR will be exactly as dis- played on the playback screen of the DVR.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

81