Mitsubishi Electronics DX-TL2500U operation manual Alarm Skip Search

To change the desired camera number to the single screen dis- play during still-frame playback in SPLIT16 display, press the SEARCH button to clear the search setting screen and press the desired cam- era number button.

Search may not perform properly at times depending on the re- corded condition of the index signals.

■ALARM SKIP SEARCH

This function searches up to where the Alarm recording signal is located, and can playback at 4 second intervals.

<ALARM SKIP SEARCH> In the case of forward direction

	Present position
SKIP COUNT		01			02
			Alarm			Alarm
			Recording			Recording
		Index signal			Index signal
	Search			Search		Search
			Approx. 4 sec.			Approx. 4 sec.
			play			play

1.Press the SEARCH button.

•The search screen selected in the “SEARCH TYPE” ( see page 75 ) appears.

2.(When the desired search screen is not displayed on the screen • • • ) Change the above “SEARCH TYPE” setting and display the “ALARM SKIP SEARCH” screen.

3.Select “EXECUTE(FORWARD)” or “EXECUTE(REVERSE)” and confirm.

•“EXECUTE(FORWARD)” : Search is performed in the forward direction.

•“EXECUTE(REVERSE)” : Search is performed in the reverse direction.

•To cancel the search, press the SEARCH button twice.

•Playback of search result from skip search will be in SPLIT16 display regardless

of whether the “SELECTION CAMERA NUMBER” ( see page 75 ) is set to “ALL” or individual camera number is selected.

• To return to the normal screen, press the SEARCH button twice.

Press the desired camera number button when performing skip search in SPLIT16 display, the video of the camera number button is changed to single screen display.

4.Press the PAUSE button when the desired video is displayed and press the PLAY button.

5.To stop ALARM SKIP SEARCH, press the STOP button.

When performing skip search in the reverse direction with index signals of less than 4 seconds, that portion may play back repeat- edly. In this case, press the STOP button to stop the search and perform skip search in the reverse direction again after the particular portion has been passed using reverse playback, etc.

Search may not perform properly at times depending on the re- corded condition of the index signals.

03

Alarm

Recording

Index signal

Search

Approx. 4 sec. play

<ALARM SKIP SEARCH>

>>EXECUTE(FORWARD)

EXECUTE(REVERSE)

PUSH SEARCH KEY FOR SEARCH SELECTION

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

77