To simulate surround sound 3D Phonic

3 To define a user setting, select a parameter to be edited using 5/∞ from the following.

•GAMMA

Controls the brightness of a shaded portion without changing the brightness of the entire picture.

This control is optimum when you adjust the pictures of software which generates subdued black in a bright room.

The setting range is + 4 to – 4.

•BRIGHTNESS

Controls the brightness of the screen. The setting range is +16 to – 16.

•CONTRAST

Controls the contrast of the screen. The setting range is +16 to – 16.

•SATURATION

Controls the color depth of the screen. The setting range is +16 to – 16.

•TINT

Controls the tint of the screen.

Use the appearance of a natural skin tone as a guideline.

The setting range is +16 to – 16.

•SHARPNESS

Controls the sharpness of the screen. The setting range is + 3 to 0.

•Y DELAY

Controls the color gap of the screen. The setting range is + 2 to – 2.

4 Press ENTER.

A window for setting parameters appears instead of the VFP mode selection window.

SATURATION

Selected parameter

5 Adjust the level of the parameter using 5/∞.

The higher value enhances the effect.

6 Press ENTER.

The parameter is set and the VFP mode selection window appears again.

Repeat steps 3 to 6 if you want to set other parameters.

NOTES

•The number of setting steps varies for different parameters.

•To dismiss the VFP mode selection window: Press VFP - PROGRESSIVE SCAN.

•The window for VFP mode selection and parameter setting disappears if no operation is made for about 10 seconds.

Advanced operations