JVC XV-NA7SL manual Use 5/∞ to select a desired digital output signal type

Page 19

8 Use 5/∞ to select a desired digital output signal type.

You must set this item correctly when you connect the unit to an external surround decoder or D/A convertor (including an amplifier/receiver with built-in surround decoder or D/A convertor).

(If you do not connect the unit to such a device, you do not have to set this item.)

•When connecting with a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].

•When connecting with a DTS or MPEG Multichannel decoder, select [STREAM/PCM].

•When connecting with other digital devices, select [PCM ONLY].

9 Press ENTER.

The TV screen returns to show the opening display.

NOTES

•This setting may not be necessary except when turning on the power after purchasing the unit.

•You can also set these items, as well as other preferences, by pressing CHOICE briefly to bring up the preference display. See "Changing the initial settings" on and after page 57 for details.

Basic operations

Image 19

Contents XV-NA7SL XV-NA7SL If in Doubt Consult a Competent ElectricianTable of Contents R6PSUM-3/AA15F battery ⋅ Supplied accessoriesAbout this instructions manual Important cautions Safety precautionsAudio formats About discsPlayable disc types Non-playable discsSVCDs and Video CDs with Playback Control function Disc structureCare and handling of discs Connection to a conventional TV ConnectionsBefore making any connections To connect to a TVConnection to a TV equipped with an S-video jack To connect to a TV with the Scart connectorConnection to a TV equipped with component jacks How to set the unit to supply RGB signalsPress and hold down the PAL/NTSC button To switch the signal format from the remote control unitAbout Scanning Mode To make the Progressive scanning mode selection activeMode Setting of Still Source type of DVD VideoTo connect to a stereo audio amplifier/receiver Press and hold down VFP Progressive Scan for a few secondsAudio cable supplied Red White Amplifier or receiver To connect to a digital audio device To connect the power cordPrecautions Using the remote control unitTo install batteries in the remote control unit Precautions for the safe use of batteriesManufacturer code list To use the remote control unit for TV operationTo control the volume of a JVC’s amplifier or receiver Setting the remote control signal for operating your TVTurning on/off the unit Before operationPress Enter Initial setup before using the unitUse 5/∞ to select a desired analog output signal type Use 5/∞ to select a desired languageTV screen returns to show the opening display Use 5/∞ to select a desired digital output signal type1Use 5/∞/2/3 to select a desired item 2Press Enter Basic playbackInserting and removing discs OPEN/CLOSETo stop playback completely To start playbackPress To memorize the interrupt position When the resume mode is set to Disc ResumeResuming playback To stop playback temporarilyTo resume playback When the resume mode is set to on¶ While stopped, or no disc is inserted To advance a still picture frame by frame Method 1 from the remote control unit onlyVariable speed playback To advance or reverse playback rapidly while monitoringPress 8, then use 1/¡ To locate a desired selection using 4 or ¢To locate the beginning of the scene or song To playback in slow-motionUnit status Disc type What is specified To locate a desired selection using the numeric buttonsUse the numeric buttons to specify the number On Screen Angle Other convenient functionsTo check the playback status Press on ScreenExample of the menu bar for DVD Video You can adjust the brightness of the display windowTo change the brightness of the display window Press 5 or ∞ while holding down AngleTOP Playing from a specific position on a discTo locate a desired scene from the DVD menu Press TOP Menu or MenuPress TITLE/GROUP To specify a desired title/groupPress 3 or TOP Menu Use the numeric buttons to select the desired itemUse 2/3 to move to , then press Press on Screen twiceUse the numeric buttons 0 to 10 to enter the desired time Up to nine opening scenes are displayed To locate a specific scene from the display DigestPress Digest ¶ For DVD Video During playback or while StoppedUse the numeric buttons 0 to 9 to enter the key number To select a still picture on a DVD Audio discTo play back a bonus group of a DVD Audio disc Use page or 5/∞ to select the desired¶ While stopped Changing the playback orderTo playback in a specific order Program play Use 2/3 to move to ProgPress 3 to start program playback Press Repeat Repeat playbackTo playback in random order Random play Use 2/3 to move toUse 5/∞ to select A-B To quit A-B repeat playback Changing the language, sound and scene angleTo select the subtitle language Subtitle Press SubtitleUse Audio fs/Rate or 5/∞ to select the desired audio To change the audio language or sound AudioUse 5/∞ or Subtitle to select the subtitle Press Audio fs/RateUse Angle or 5/∞ to select the desired angle To select a scene angle of DVD Video AngleFrom the Angle selection window Press AngleTo display continuous still pictures Strobe Special picture playback and picture/sound effectFrom the angle list Use 5/∞/2/3 to move the zoomed position To adjust the picture character VFPUse 2/3 to select the desired preset To zoom in or out pictures ZoomPress 3D Phonic Adjust the level of the parameter using 5/∞Select the desired mode by using 2 To simulate surround sound 3D PhonicChecking the sampling frequency and bit rate Press 5/∞ to adjust the effect levelPress and hold down Audio fs/Rate for a few seconds Press on Screen again Basic operation procedureMenu bar functions Use 2/3 to select the icon you want to work withAssociated icon is selected Menu bar functions for DVD AudioFollowing table shows the menu bar Operation column, we assumeFunctions available for DVD Video Menu bar functions for DVD VideoTitle ALL Menu bar functions for SVCD/Video CD/Audio CDBasic operations What is MP3?About MP3 discs OperationsYou can specify the desired Group/Track from Move the bar to a desired Group using 5/∞Display using the following procedure ¶ When the MP3 Control display is shownUse the numeric buttons to specify a desired Track number Direct selectionRepeat playback Use the numeric buttons to specify a desired Group numberChecking the sampling frequency and bit rate Press 7 . Note that the repeat mode remains activeTo stop repeat playback About Jpeg discs What is JPEG?To display another picture Select a desired file using 4/¢Basic operations To see a desired pictureTo return to a normal screen Press Enter Image may look coarse when a zoomed image is displayedPress Zoom + or ¶ While a Jpeg image is displayed on the TV screenSelecting the start point of the slide show Slide show modePlayback features To see pictures continuouslyUse the numeric buttons to specify a desired file number Direct selectionJpeg TV Screen Selected repeat modeRepeat function On the Jpeg Control display goes offSelecting preferences How to set preferencesAbout the Preference display Table of languages and their abbreviations Language menuPicture menu Audio menu Digital output signal chartExpert SPK.SETTING menuDelay Range Compression AutoThis menu allows you to set various system options Others menuTo set the speaker sizes Making fine tuning for your speakersBass Redirect function To set the speaker level To set the delay timeUse 5/∞ to select Test Tone and press To generate test tone signalsYou can check the level setting by monitoring the test tone Limiting playback by childrenUse 5/∞ to select the country code Enter a 4-digit password using the numeric buttons 0 toTo set Parental Lock for the first time Use 5/∞ to move to select Parental Lock and press EnterAvailable You can change the Parental Lock settings later To change the settingsUse 5/∞ to select the desired option and press Enter To temporarily release the Parental Lock Parental Lock Enter your 4-digit password using the numeric buttons 0 toRear panel Names of parts and controlsFront panel Display windowRemote control unit Operation TroubleshootingPower Symptom Possible cause RemedyAudio PictureQuestion Answer Frequently Asked QuestionsSpecifications Appendix a Country/Area code list for Parental Lock Appendix B Glossary Packet Writing PAL Phase Alternation by LineMultisession Ntsc National television system committeeAbove ALL Let op Vorsicht¡Precaución Forsigtig AttenzioneObservera Huomautus