JVC XV-NA7SL manual Above ALL

Page 80

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

—NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case -this could result in a fatal electrical shock.;

—NEVER guess or take chances with electrical equipment of any kind -it is better to be safe than sorry!

VICTOR COMPANY OF JAPAN, LIMITED

EN.

JVC 0702KTYBICJSC

© 2002 VICTOR COMPANY OF JAPAN, LIMITED

Image 80
Contents XV-NA7SL If in Doubt Consult a Competent Electrician XV-NA7SLTable of Contents About this instructions manual Supplied accessoriesR6PSUM-3/AA15F battery ⋅ Safety precautions Important cautionsAbout discs Playable disc typesNon-playable discs Audio formatsCare and handling of discs Disc structureSVCDs and Video CDs with Playback Control function Connections Before making any connectionsTo connect to a TV Connection to a conventional TVTo connect to a TV with the Scart connector Connection to a TV equipped with an S-video jackHow to set the unit to supply RGB signals Connection to a TV equipped with component jacksTo switch the signal format from the remote control unit About Scanning ModeTo make the Progressive scanning mode selection active Press and hold down the PAL/NTSC buttonSetting of Still Source type of DVD Video To connect to a stereo audio amplifier/receiverPress and hold down VFP Progressive Scan for a few seconds ModeAudio cable supplied Red White Amplifier or receiver To connect the power cord To connect to a digital audio deviceUsing the remote control unit To install batteries in the remote control unitPrecautions for the safe use of batteries PrecautionsTo use the remote control unit for TV operation To control the volume of a JVC’s amplifier or receiverSetting the remote control signal for operating your TV Manufacturer code listBefore operation Turning on/off the unitInitial setup before using the unit Use 5/∞ to select a desired analog output signal typeUse 5/∞ to select a desired language Press EnterUse 5/∞ to select a desired digital output signal type TV screen returns to show the opening displayBasic playback Inserting and removing discsOPEN/CLOSE 1Use 5/∞/2/3 to select a desired item 2Press EnterPress To start playbackTo stop playback completely When the resume mode is set to Disc Resume Resuming playbackTo stop playback temporarily To memorize the interrupt position¶ While stopped, or no disc is inserted When the resume mode is set to onTo resume playback Method 1 from the remote control unit only Variable speed playbackTo advance or reverse playback rapidly while monitoring To advance a still picture frame by frameTo locate a desired selection using 4 or ¢ To locate the beginning of the scene or songTo playback in slow-motion Press 8, then use 1/¡Use the numeric buttons to specify the number To locate a desired selection using the numeric buttonsUnit status Disc type What is specified Other convenient functions To check the playback statusPress on Screen On Screen AngleYou can adjust the brightness of the display window To change the brightness of the display windowPress 5 or ∞ while holding down Angle Example of the menu bar for DVD VideoPlaying from a specific position on a disc To locate a desired scene from the DVD menuPress TOP Menu or Menu TOPTo specify a desired title/group Press 3 or TOP MenuUse the numeric buttons to select the desired item Press TITLE/GROUPUse the numeric buttons 0 to 10 to enter the desired time Press on Screen twiceUse 2/3 to move to , then press To locate a specific scene from the display Digest Press Digest¶ For DVD Video During playback or while Stopped Up to nine opening scenes are displayedTo select a still picture on a DVD Audio disc To play back a bonus group of a DVD Audio discUse page or 5/∞ to select the desired Use the numeric buttons 0 to 9 to enter the key numberChanging the playback order To playback in a specific order Program playUse 2/3 to move to Prog ¶ While stoppedPress 3 to start program playback Repeat playback To playback in random order Random playUse 2/3 to move to Press RepeatUse 5/∞ to select A-B Changing the language, sound and scene angle To select the subtitle language SubtitlePress Subtitle To quit A-B repeat playbackTo change the audio language or sound Audio Use 5/∞ or Subtitle to select the subtitlePress Audio fs/Rate Use Audio fs/Rate or 5/∞ to select the desired audioTo select a scene angle of DVD Video Angle From the Angle selection windowPress Angle Use Angle or 5/∞ to select the desired angleFrom the angle list Special picture playback and picture/sound effectTo display continuous still pictures Strobe To adjust the picture character VFP Use 2/3 to select the desired presetTo zoom in or out pictures Zoom Use 5/∞/2/3 to move the zoomed positionAdjust the level of the parameter using 5/∞ Select the desired mode by using 2To simulate surround sound 3D Phonic Press 3D PhonicPress and hold down Audio fs/Rate for a few seconds Press 5/∞ to adjust the effect levelChecking the sampling frequency and bit rate Basic operation procedure Menu bar functionsUse 2/3 to select the icon you want to work with Press on Screen againMenu bar functions for DVD Audio Following table shows the menu barOperation column, we assume Associated icon is selectedTitle Menu bar functions for DVD VideoFunctions available for DVD Video Menu bar functions for SVCD/Video CD/Audio CD ALLWhat is MP3? About MP3 discsOperations Basic operationsMove the bar to a desired Group using 5/∞ Display using the following procedure¶ When the MP3 Control display is shown You can specify the desired Group/Track fromDirect selection Repeat playbackUse the numeric buttons to specify a desired Group number Use the numeric buttons to specify a desired Track numberTo stop repeat playback Press 7 . Note that the repeat mode remains activeChecking the sampling frequency and bit rate What is JPEG? About Jpeg discsSelect a desired file using 4/¢ Basic operationsTo see a desired picture To display another pictureImage may look coarse when a zoomed image is displayed Press Zoom + or¶ While a Jpeg image is displayed on the TV screen To return to a normal screen Press EnterSlide show mode Playback featuresTo see pictures continuously Selecting the start point of the slide showDirect selection Use the numeric buttons to specify a desired file numberTV Screen Selected repeat mode Repeat functionOn the Jpeg Control display goes off JpegAbout the Preference display How to set preferencesSelecting preferences Language menu Table of languages and their abbreviationsPicture menu Digital output signal chart Audio menuSPK.SETTING menu DelayRange Compression Auto ExpertOthers menu This menu allows you to set various system optionsBass Redirect function Making fine tuning for your speakersTo set the speaker sizes To set the delay time To set the speaker levelTo generate test tone signals You can check the level setting by monitoring the test toneLimiting playback by children Use 5/∞ to select Test Tone and pressEnter a 4-digit password using the numeric buttons 0 to To set Parental Lock for the first timeUse 5/∞ to move to select Parental Lock and press Enter Use 5/∞ to select the country codeUse 5/∞ to select the desired option and press Enter To change the settingsAvailable You can change the Parental Lock settings later Enter your 4-digit password using the numeric buttons 0 to To temporarily release the Parental Lock Parental LockNames of parts and controls Front panelDisplay window Rear panelRemote control unit Troubleshooting PowerSymptom Possible cause Remedy OperationPicture AudioFrequently Asked Questions Question AnswerSpecifications Appendix a Country/Area code list for Parental Lock Appendix B Glossary PAL Phase Alternation by Line MultisessionNtsc National television system committee Packet WritingAbove ALL ¡Precaución VorsichtLet op Attenzione ObserveraHuomautus Forsigtig