JVC XV-NA7SL manual Specifications

Page 76

Additional information

Specifications

* Specifications and appearance subject to change without prior notice.

General

Readable discs:

DVD AUDIO, DVD VIDEO, DVD-R (Video format), SVCD, Video CD, Audio CD (CD-DA), MP3

 

format, JPEG, CD-R/RW (CD-DA, SVCD, Video CD, MP3 format, JPEG)

Video format:

PAL: 625i (Interlaced scanning)

 

NTSC: 525i (Interlaced scanning)/525p (Progressive scanning) (selectable)

Other

Power requirements:

AC 230 V Ó, 50 Hz

Power consumption:

15 W (POWER ON), 2.4 W (STANDBY mode)

Mass:

2.4 kg

Dimensions (W ⋅ H ⋅ D):

435 mm ⋅ 55 mm ⋅ 258.4 mm

Video outputs

COMPONENT (pin jacks):

Y Output:

1.0 Vp-p (75 Ω)

 

PB/PR Output:

0.7 Vp-p (75 Ω)

VIDEO OUT (pin jack):

1.0 Vp-p (75 Ω)

1.0 Vp-p (75 Ω)

S-VIDEO OUT (S jack):

Y Output:

 

C Output:

286 mVp-p (75 Ω)

 

RGB Output:

700mVp-p(75 Ω)

Horizontal resolution:

500 Lines or more

 

Audio outputs

ANALOG OUT (pin jack):

2.0

Vrms (10 kΩ)

DIGITAL OUT: (COAXIAL):

0.5

Vp-p (75 Ω termination)

(OPTICAL):

–21 dBm to –15 dBm (peak)

Audio characteristics

Frequency response:

CD

(sampling frequency 44.1 kHz):

2 Hz to 20 kHz

 

DVD

(sampling frequency 48 kHz):

2 Hz to 22 kHz

 

 

(2 Hz to 20 kHz for DTS and Dolby Digital bitstream signals)

 

DVD

(sampling frequency 96kHz/88.2 kHz):2 Hz to 44 kHz

 

DVD

(sampling frequency 192 kHz/176.4 kHz): 2 Hz to 88 kHz

Dynamic range:

16 bit: More than 98 dB

 

 

20 bit: More than 110 dB

 

 

24 bit: More than 110 dB

 

Wow and flutter:

Unmeasurable (less than ± 0.002%)

 

Total harmonic distortion:

Less than 0.002%

 

Additional

information

 

 

74

Page 75 Page 77
Image 76
Page 75 Page 77
Contents XV-NA7SL If in Doubt Consult a Competent Electrician XV-NA7SLTable of Contents R6PSUM-3/AA15F battery ⋅ Supplied accessoriesAbout this instructions manual Safety precautions Important cautionsAbout discs Playable disc typesNon-playable discs Audio formatsSVCDs and Video CDs with Playback Control function Disc structureCare and handling of discs Connections Before making any connectionsTo connect to a TV Connection to a conventional TVTo connect to a TV with the Scart connector Connection to a TV equipped with an S-video jackHow to set the unit to supply RGB signals Connection to a TV equipped with component jacksTo switch the signal format from the remote control unit About Scanning ModeTo make the Progressive scanning mode selection active Press and hold down the PAL/NTSC buttonSetting of Still Source type of DVD Video To connect to a stereo audio amplifier/receiverPress and hold down VFP Progressive Scan for a few seconds ModeAudio cable supplied Red White Amplifier or receiver To connect the power cord To connect to a digital audio deviceUsing the remote control unit To install batteries in the remote control unitPrecautions for the safe use of batteries PrecautionsTo use the remote control unit for TV operation To control the volume of a JVC’s amplifier or receiverSetting the remote control signal for operating your TV Manufacturer code listBefore operation Turning on/off the unitInitial setup before using the unit Use 5/∞ to select a desired analog output signal typeUse 5/∞ to select a desired language Press EnterUse 5/∞ to select a desired digital output signal type TV screen returns to show the opening displayBasic playback Inserting and removing discsOPEN/CLOSE 1Use 5/∞/2/3 to select a desired item 2Press EnterTo stop playback completely To start playbackPress When the resume mode is set to Disc Resume Resuming playbackTo stop playback temporarily To memorize the interrupt positionTo resume playback When the resume mode is set to on¶ While stopped, or no disc is inserted Method 1 from the remote control unit only Variable speed playbackTo advance or reverse playback rapidly while monitoring To advance a still picture frame by frameTo locate a desired selection using 4 or ¢ To locate the beginning of the scene or songTo playback in slow-motion Press 8, then use 1/¡Unit status Disc type What is specified To locate a desired selection using the numeric buttonsUse the numeric buttons to specify the number Other convenient functions To check the playback statusPress on Screen On Screen AngleYou can adjust the brightness of the display window To change the brightness of the display windowPress 5 or ∞ while holding down Angle Example of the menu bar for DVD VideoPlaying from a specific position on a disc To locate a desired scene from the DVD menuPress TOP Menu or Menu TOPTo specify a desired title/group Press 3 or TOP MenuUse the numeric buttons to select the desired item Press TITLE/GROUPUse 2/3 to move to , then press Press on Screen twiceUse the numeric buttons 0 to 10 to enter the desired time To locate a specific scene from the display Digest Press Digest¶ For DVD Video During playback or while Stopped Up to nine opening scenes are displayedTo select a still picture on a DVD Audio disc To play back a bonus group of a DVD Audio discUse page or 5/∞ to select the desired Use the numeric buttons 0 to 9 to enter the key numberChanging the playback order To playback in a specific order Program playUse 2/3 to move to Prog ¶ While stoppedPress 3 to start program playback Repeat playback To playback in random order Random playUse 2/3 to move to Press RepeatUse 5/∞ to select A-B Changing the language, sound and scene angle To select the subtitle language SubtitlePress Subtitle To quit A-B repeat playbackTo change the audio language or sound Audio Use 5/∞ or Subtitle to select the subtitlePress Audio fs/Rate Use Audio fs/Rate or 5/∞ to select the desired audioTo select a scene angle of DVD Video Angle From the Angle selection windowPress Angle Use Angle or 5/∞ to select the desired angleTo display continuous still pictures Strobe Special picture playback and picture/sound effectFrom the angle list To adjust the picture character VFP Use 2/3 to select the desired presetTo zoom in or out pictures Zoom Use 5/∞/2/3 to move the zoomed positionAdjust the level of the parameter using 5/∞ Select the desired mode by using 2To simulate surround sound 3D Phonic Press 3D PhonicChecking the sampling frequency and bit rate Press 5/∞ to adjust the effect levelPress and hold down Audio fs/Rate for a few seconds Basic operation procedure Menu bar functionsUse 2/3 to select the icon you want to work with Press on Screen againMenu bar functions for DVD Audio Following table shows the menu barOperation column, we assume Associated icon is selectedFunctions available for DVD Video Menu bar functions for DVD VideoTitle Menu bar functions for SVCD/Video CD/Audio CD ALLWhat is MP3? About MP3 discsOperations Basic operationsMove the bar to a desired Group using 5/∞ Display using the following procedure¶ When the MP3 Control display is shown You can specify the desired Group/Track fromDirect selection Repeat playbackUse the numeric buttons to specify a desired Group number Use the numeric buttons to specify a desired Track numberChecking the sampling frequency and bit rate Press 7 . Note that the repeat mode remains activeTo stop repeat playback What is JPEG? About Jpeg discsSelect a desired file using 4/¢ Basic operationsTo see a desired picture To display another pictureImage may look coarse when a zoomed image is displayed Press Zoom + or¶ While a Jpeg image is displayed on the TV screen To return to a normal screen Press EnterSlide show mode Playback featuresTo see pictures continuously Selecting the start point of the slide showDirect selection Use the numeric buttons to specify a desired file numberTV Screen Selected repeat mode Repeat functionOn the Jpeg Control display goes off JpegSelecting preferences How to set preferencesAbout the Preference display Language menu Table of languages and their abbreviationsPicture menu Digital output signal chart Audio menuSPK.SETTING menu DelayRange Compression Auto ExpertOthers menu This menu allows you to set various system optionsTo set the speaker sizes Making fine tuning for your speakersBass Redirect function To set the delay time To set the speaker levelTo generate test tone signals You can check the level setting by monitoring the test toneLimiting playback by children Use 5/∞ to select Test Tone and pressEnter a 4-digit password using the numeric buttons 0 to To set Parental Lock for the first timeUse 5/∞ to move to select Parental Lock and press Enter Use 5/∞ to select the country codeAvailable You can change the Parental Lock settings later To change the settingsUse 5/∞ to select the desired option and press Enter Enter your 4-digit password using the numeric buttons 0 to To temporarily release the Parental Lock Parental LockNames of parts and controls Front panelDisplay window Rear panelRemote control unit Troubleshooting PowerSymptom Possible cause Remedy OperationPicture AudioFrequently Asked Questions Question AnswerSpecifications Appendix a Country/Area code list for Parental Lock Appendix B Glossary PAL Phase Alternation by Line MultisessionNtsc National television system committee Packet WritingAbove ALL Let op Vorsicht¡Precaución Attenzione ObserveraHuomautus Forsigtig
Top Page Image Contents