JVC XV-NA7SL manual Audio menu, Digital output signal chart

Changing the initial settings

Changing the initial settings

AUDIO menu
		This menu allows you to select desired options concerning with audio sound.
AUDIO
DIGITAL AUDIO OUTPUT		STREAM/PCM
ANALOG OUT		MULTI CHANNEL
D. RANGE COMPRESSION		AUTO
SELECT	USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER	TO EXIT, PRESS CHOICE.

Menu item		Setting options	Notes/examples
DIGITAL AUDIO OUTPUT	•	PCM ONLY	• When playing a DVD VIDEO or
To connect the unit’s digital		Should be selected when you connect the DIGITAL	Audio CD disc with DTS, use a DTS
output to an external device		OUT jack of the unit to the linear PCM digital input of	decoder to get correct signals from
equipped with a digital input,		other audio equipment.	your speakers.
this item must be set correctly.			• With some DVD VIDEO discs that
	•	DOLBY DIGITAL/PCM
See the table following for			are not fully copy-protected, a 20
details about the relation		Should be selected when you connect the digital	or 24 bit digital signal may be
between the setting and		input of a Dolby Digital decoder or an amplifier with	output.
output signals.		a built-in Dolby Digital decoder.	• A signal recorded with the 88.2 kHz
		When this option is selected, playing back a disc	or higher sampling frequency
		recorded by the DTS or MPEG Multichannel format	cannot be output from the DIGITAL
		outputs a linear PCM digital signal.	OUT jack, regardless of the setting
			(due to copy protection issues).
	• STREAM/PCM
		Should be selected when you connect the digital
		input of an amplifier with a built-in DTS, MPEG
		Multichannel or Dolby Digital decoder, or the stand-
		alone unit of such a decoder.
Digital output signal chart

Disc type			Output
	PCM ONLY		DOLBY DIGITAL/PCM	STREAM/PCM
DVD with 48/44.1 kHz, 16/20/24	48/44.1 kHz,16 bit, stereo linear PCM
bit linear PCM
DVD with 192/176.4/96/88.2			No output
kHz, 16/22/24 bit linear PCM
DVD with DTS	48 kHz, 16 bit, stereo linear PCM			DTS bitstream
DVD with Dolby Digital	48 kHz, 16 bit, stereo linear PCM		Dolby Digital bitstream
DVD with MPEG Multichannel	48 kHz, 16 bit, stereo linear PCM			MPEG bitstream
Audio CD/Video CD/SVCD		44.1 kHz,16 bit, stereo linear PCM
Audio CD with DTS	44.1 kHz, 16 bit, stereo linear PCM			DTS bitstream
CD-R/RW with MP3			Linear PCM

Menu item		Setting options	Notes/examples
ANALOG OUT	• 2-CH DOLBY SURROUND		• This function does not work when
To play back a DVD VIDEO		Should be selected when you enjoy multichannel	the 3D PHONIC function is
disc recorded with surround		surround audio by connecting the unit’s AUDIO OUT	activated (see page 41).
multichannel audio correctly,		jacks to a surround decoder.	• [2-CH DOLBY SURROUND] and
this setting must be properly			[2-CH STEREO] settings affect only
	•	2-CH STEREO
made according to your audio			the output signal from the AUDIO
system.		Should be selected when you enjoy conventional 2-	OUT jacks when playing back a
		channel stereo audio by connecting the unit’s AUDIO	DVD VIDEO disc recorded with
		OUT jacks to a stereo amplifier/receiver or television	surround multichannel audio.
		set, or when you duplicate audio of a DVD VIDEO	• Some DVD AUDIO discs prohibit
		disc recorded with surround audio to your MD,	the 2-channel down-mix. For such
		cassette, etc.	a disc, you cannot get the down-
			mixed signal even if you set
	•	MULTI CHANNEL
			[ANALOG OUT] to [2-DOLBY
		When you enjoy multichannel surround audio by	SURROUND] or [2-CH STEREO].
		connecting the unit’s 5.1-channel audio outputs to an
		amplifier equipped with 5.1-channel inputs.

60