JVC BD-X200E manual Event Messages

Event Messages

Event messages are displayed on the DVD recorder’s LCD display and on the monitor when incorrect operations are attempted. These messages will remain on-screen for approximately 3 seconds.

English

Monitor screen

000 min

	TITLE FULL
		REC
04/05/04	TITLE 1 0:11:22
11:20:00	CHAPTER 1 0:11:22

Event messages: Displayed when DISPLAY from the DISPLAY MENU screen is set to ON.

LCD display

DOLBY DIGITAL

LPCM MPEG

Event message

Monitor message	LCD display	Description
	message
INVALID TV	INVALId TV	A signal of an invalid format has been input.
		Alternatively, an attempt has been made to play a disc containing signals of an invalid
		format.
TITLE FULL	TITLE FULL	Recording was attempted on a disc already containing 99 titles.
CHAPTER FULL	CHAP FULL	An attempt was made to add a chapter to a title already containing 99 chapters.
NOT FINALIZE	NoT FINAL	An attempt was made to eject a disc before it was finalized.
————	A L-xxxx-R	Set value is displayed when changing the recording level of analog audio.
————	d L-xxxx-R	Set value is displayed when changing the recording level of digital audio.
DURATION OVER	————	Auto Edit was carried out when the remaining disc space became insufficient during
		RS-422A or DV remote operation.
INVALID EDL	————	An incorrect value was entered during the registration of an edit list (EDL).
NO CASSETTE	————	During RS-422A remote operation, an attempt was made to control the connected
		VCR while it did not contain a video tape.
NOT CONNECT	————	During RS-422A or DV remote operation, a control operation was attempted while
		no external device was connected.
EDIT FAILURE	————	Editing could not be completed normally.

E-19