JVC BD-X200E manual Inserting & Removing Discs, Inserting a Disc, Removing a Disc

Inserting & Removing Discs

Disc tray
			BUSY
OPERATE		OPEN/CLOSE
DVD RECORDER BD-X200		OPTION DV	Y/C LINE
			SET UP
AUDIO	CHAPTER
TITLE
CH1
DOLBY DIGITAL
LPCMMPEG

CH2

PHONES	REV	STOP	PLAY	FWD	PAUSE	REC	TOP	SET
							MENU	MENU

OPEN/CLOSE indicator OPEN/CLOSE button

English

Inserting a Disc

Press the OPERATE button to activate Operate On mode.

1.Press the OPEN/CLOSE button.

●The disc tray will open automatically.

While the disc tray is open, the OPEN/CLOSE indicator will be lit up.

2.Place the disc on the disc tray.

Ensure that the disc is inserted correctly into the tray’s recess with the printed side facing upward.

●Carefully place the disc in the tray so as not to hit the front panel.

Removing a Disc

Stop the DVD recorder.

1.Press the OPEN/CLOSE button.

●The disc tray will open automatically.

While the disc tray is open, the OPEN/CLOSE indicator will be lit up.

●If the current disc has not been finalized, the message “NOT FINALIZE” will appear on both the monitor and LCD display.

2.Remove the disc from the disc tray.

Be sure to wait until the disc tray has opened fully before removing the disc.

3.Press the OPEN/CLOSE button.

● The disc tray will close automatically.

Notes

●When a disc is inserted, information about that disc is displayed on-screen. (☞ Page 18)

●When either a new DVD-RW or one that has been erased on another machine is inserted, quick erase starts up. (☞ Page 31)

3.Press the OPEN/CLOSE button.

● The disc tray will close automatically.

Notes

●If the DVD recorder is in either Recording mode or Recording Pause mode, the disc tray will not open when the OPEN/CLOSE button is pressed.

●Pressing this button also has no effect during finalizing, erasing, and dubbing.

Precautions regarding the disc tray

●Do not push the disc tray as it is opening or closing.

●Do not place objects other than discs on the disc tray.

●Do not press down on the disc tray.

E-25