JVC BD-X200E SET Interval, Interv Auto Chapter OFF, REC Pause, Atchap, Total, Contents Time, Lpcm

RECORDER MENU (1/2) screen

Parameter

Possible settings

Description

SET INTERVAL

Every01min

This parameter becomes active whenever CHAPTER CREATION has been set to

AUTO.

[Every05min]

It is used to set the time interval for automatic chapter creation and is set in units of

Every59min

minutes.

INTERV

1

[5]

59

AUTO CHAPTER

OFF

Select whether to automatically insert a chapter mark during a recording pause.

(REC PAUSE)

[ON]

OFF : Do not insert a chapter mark

ON : Insert a chapter mark.

ATCHAP

oFF

[oN]

TOTAL

0:01

When the image recording time is known in advance, if the time is set with this item

CONTENTS TIME

the BD-X200 will determine the optimum encoding bit rate from the remaining volume

9:59

in the blank disc and the recording time.

(Set in hours and minutes. 00 Hour 01 Min - 09 Hour 59 Min)

CNTENS

0 01

● When the recording time is set with this item, the ENCODE QUALITY item setting

9 59

automatically changes.

ENCODE

[8.0]

This item is for directly setting the encoding bit rate (quantity of data per second).

QUALITY(Mbps)

See the column on

The bigger the number the better the image quality, however the data quantity

the right for the

increases so the time duration that can be recorded reduces.

setting range

When the setting value of this item is changed, the TOTAL CONTENTS TIME item is

automatically set.

qUALTY

[8.0]

The setting range varies depending upon the AUDIO ENCODE item setting.

LPCM

: 4.0 to 7.8Mbps (in 0.2-Mbps steps)

DOLBY DIGITAL : 2.0 to 9.0Mbps (in 0.2-Mbps steps)

MPEG

: 2.0 to 9.0 Mbps(in 0.2-Mbps steps)

AUDIO ENCODE

LPCM

This parameter is used to set the encoding format for audio data.

[DOLBY DIGITAL]

LPCM

: Linear PCM encoding (Non-compressed)

MPEG

DOLBY DIGITAL : Dolby AC3 encoding (Compressed)

MPEG

: MPEG encoding (Compressed)

A ENC

LPCM

● When recording a music source it is recommended that the setting is either DOLBY

[dd]

DIGITAL or LPCM.

MPEG

For MPEG, there can be deterioration in the sound quality, depending upon the

compression characteristics.

ASPECT

[AUTo]

The screen aspect distinction signal of recorded video is selected.

4:3

AUTO

: Aspect distinction signal is recorded according to the screen aspect

LETTER

4:3

ratio of the input video.

SQUEEZE

: Constantly records aspect distinction signal of 4:3 aspect ratio.

LETTER

: Constantly records aspect distinction signal of letterbox video.

SQUEEZE

(Content at the top and bottom of the screen is blackened out.)

ASPECT

[AUTo]

: Constantly records aspect distinction signal of squeezed video.

4 3

Note

(Content at the left and right of the screen is compressed.)

LETT

SqUE

Setting this item to LETTER or SQUEEZE will not change the output image during

recording and is reflected only in the recording to the disc.

†

This button is used to display the RECORDER MENU (2/2) screen.

REC 2

MENU

This button is used to return to the Setup Menu screen.

English

E-89