Recording
Recording with the Front Panel (continued)
Note
When recording is stopped or a title is closed, the state of progress will be indicated
| Recording stopped |
|
| Title closing | |||||
|
| REC STOP |
|
| TITLE CLOSE | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6.End recording and remove the disc.
Depending on how the disc will be used, one of two different procedures is implemented at this time.
●If more content will be recorded to the disc using this DVD recorder: Simply press the OPEN/CLOSE button and remove the disc. (Do not finalize the disc before it is removed.)
●If the disc is to be played on a different DVD player:
Finalize the disc, press the OPEN/CLOSE button, and then remove the disc. For more details regarding finalizing, refer to page 44.
Progress bar
Inserting Chapter Marks Manually or Automatically
RECORDER MENU (1/2) screen
| RECORDER MENU (1/2) |
| ||||||
|
|
|
|
|
|
|
|
|
| MENU |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| |||||
| CHAPTER CREATION |
| MANUAL | |||||
| SET INTERVAL | Every05Min | ||||||
| AUTO CHAPTER (REC PAUSE) | ON | ||||||
| TOTAL CONTENTS TIME | 01Hour 08Min | ||||||
| ENCODE QUALITY (Mbps) | 8.0 | ||||||
| AUDIO ENCODE | DOLBY DIGITAL | ||||||
| ASPECT | AUTO | ||||||
|
|
|
|
|
|
|
|
|
It is possible to insert a chapter mark either manually or automatically.
The actual method to be used is determined by CHAPTER CREATION and SET INTERVAL from the RECORDER MENU (1/2) screen.
●If chapter marks are to be inserted manually at any point, set CHAPTER CREATION to MANUAL.
Chapter marks can then be inserted by pressing the REC button while recording.
●If chapter marks are to be inserted automatically, first of all set CHAPTER CREATION to AUTO. Then use SET INTERVAL to set a time (in minutes) for chapter mark insertion.
The DVD recorder will insert chapter marks at the corresponding intervals during recording.
Whether a chapter mark is automatically inserted or not during a recording pause is set with the AUTO CHAPTER (REC PAUSE) item.
ON : Insert a chapter mark.
OFF : Do not insert a chapter mark.
Notes
●The frame at which a chapter mark is inserted will be used for the corresponding thumbnail in the chapter menu. When EDIT MENU from the SYSTEM MENU screen is set to ENABLE, the frames used for thumbnails can be modified on the THUMBNAIL EDIT screen that appears automatically at the end of recording.
●Each title can contain up to 99 chapters.
●In certain cases, the frames used for chapter menu thumbnails may differ slightly from the exact frames at which the corresponding chapter marks were inserted.
●When the INTRODUCTION TITLE item of the RECORDER MENU (2/2) screen is set to ON, a chapter mark cannot be inserted while recording title 1.