JVC BD-X200E manual Disc Menu Screen, Input Select Menu Screen

Setup Menu

DISC MENU Screen

The following table identifies and describes the parameters that may be set using the DISC MENU screen.

Top half			: Appearance on monitor screen
Bottom half			: Appearance on LCD display
[ ]			: Default setting
		Parameter		Possible settings						Description
	FINALIZE				[CANCEL]			This parameter indicates whether or not the recorded disc is to be finalized. If a disc
					EXECUTE			recorded using this DVD recorder is to be played on a DVD player, it must first be
								finalized. Once finalizing has been carried out, no addition recordings can be made
								on the disc.
	FINAL					[CAN]
								CANCEL	:	Finalizing is not to be carried out.
							EXE	EXECUTE :		Finalizing is to be carried out.
										It will be necessary to close all titles on a disc before it can be finalized.
										* A maximum of 20 minutes will be required to complete finalizing.
	CANCEL DISC				[CANCEL]			Select whether to cancel the finalization of a finalized DVD-RW. To add a recording
	FINALIZATION				EXECUTE			to a finalized DVD-RW set to EXECUTE. A DVD-RW finalized on another machine
								cannot be canceled.
	CAN FIN					[CAN]
								CANCEL	:	Do not cancel the finalization.
							EXE	EXECUTE : Cancel the finalization. The TOP MENU created during finalization is
										deleted.
	DISC ERASE				[CANCEL]			Select whether to do a quick erase on a DVD-RW (video mode). A quick erase only
	(QUICK)				EXECUTE			deletes the DVD-RW disc control area. The time required is shorter than a full erase,
								and the disc data is deleted.
	q ERASE					[CAN]
								CANCEL	: Do not do a quick erase.
							EXE	EXECUTE : Do a quick erase. The disc can be newly recorded from the beginning.
	DISC ERASE				[CANCEL]			Select whether to carry out a full erase on a DVD-RW (video mode). All areas of a
	(FULL)				EXECUTE			DVD-RW disc are deleted. If a disc is to be used repeatedly delete using this item.
								CANCEL : Do not do a full erase.
	F ERASE					[CAN]
								EXECUTE : Do a full erase. The disc can be newly recorded from the beginning.
							EXE

MENU

This button is used to return to the Setup Menu screen.

INPUT SELECT MENU Screen

The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.

Top half			: Appearance on monitor screen
Bottom half			: Appearance on LCD display
[ ]			: Default setting
		Parameter		Possible settings			Description
	INPUT SELECT				[LINE]		This parameter is used to select the audio and video input signals.
						Y/C	LINE : The composite video signal from the VIDEO LINE IN terminal and the analog
						DV	audio signals from the AUDIO IN terminals are to be used.
							Y/C : The YC separate signal from the Y/C IN terminal and the analog audio signals
							from the AUDIO IN terminals are to be used.
							DV : The digital video and audio signals from the DV IN/OUT terminal are to be
	INPUT				[LINE]
							used.
						YC	* The front-panel indicator corresponding to the type of input signal selected on this
						dV	screen will light up or start to flash.
							Setting of this parameter will not be possible when REMOTE SELECT from the
							REMOTE MENU screen has been set to DV(MASTER), DV(SLAVE), or
							DV(TRIGGER). DV signals will be used for input at these times

MENU

This button is used to return to the Setup Menu screen.

E-86