Adjusting of Audio Recording Levels
This DVD recorder’s audio recording levels can be adjusted using two different methods, and AUDIO REC VOLUME MODE from the RECORDER MENU (2/2) screen indicates the method to be used. In addition, it is also possible to return the audio recording levels to their default settings (i.e., unity gain).
Note: The AUDIO INPUT LEVEL switch on the DVD recorder’s rear panel can be used to select the reference input level for analog audio (i.e., +4 dB or
English
Selecting the Adjustment Method
RECORDER MENU (2/2) screen
| RECORDER MENU (2/2) |
| |
|
|
|
|
| BACK |
|
|
| Y/C TERMINAL MODE | S1 | |
| THUMBNAIL FORM | NORMAL | |
| AUDIO CHANNEL (DV) | 1,2ch † 1,2ch | |
| AUDIO REC VOLUME MODE | BOTH | |
| DISC IN ACTION | MENU | |
| TITLE END | MENU | |
| DVD MENU TYPE | TOP+MENU | |
| INTRODUCTION TITLE | OFF | |
|
|
|
|
1.Open the RECORDER MENU (2/2) screen.
To do this, select † button from the RECORDER MENU (1/2) screen and press the SET button.
2.Make the required setting using AUDIO REC VOLUME MODE
from the RECORDER MENU (2/2) screen.
BOTH: Audio levels are adjusted while both the CH1/CH2 are maintained at the same volume.
INDEPENDENCE : The CH1/CH2 are adjusted separately.
Adjusting the Audio Recording Levels
|
|
|
|
|
| BUSY |
|
| OPERATE |
|
|
| OPEN/CLOSE |
| |
|
| DVD RECORDER |
| OPTION DV | Y/C LINE |
| |
|
|
|
| SET UP |
| ||
Audio level indicator | AUDIO | TITLE | CHAPTER |
|
|
| |
CH1 | DOLBY DIGITAL |
|
|
|
|
| |
|
| LPCM MPEG |
|
|
|
|
|
| CH2 |
|
|
|
|
| Buttons used |
|
|
|
| MENU MENU | SET | ||
| PHONES | REV STOP PLAY | FWD PAUSE REC | TOP |
|
|
|
Return from setting screens to the normal display.
Recording levels can be adjusted in either Stop or Recording mode. Be sure to monitor the front panel’s audio level indicator as the levels are being adjusted. Adjust the level so that the LED on the far right does not light.
Adjusting both channels together (BOTH) |
| Adjusting both channels separately (INDEPENDENCE) | ||||||
To raise the recording level |
|
|
|
| To adjust the Channel 1 level | |||
| Press the 6 button while holding the 8 or |
| Press either the 6 or 7 button while | |||||
| t button to raise the audio recording levels |
| holding the 8 button. | |||||
SET | for | Channel | 1 | and | Channel | 2 | SET | Pressing the 6 button raises the recording |
| simultaneously. |
|
|
|
|
| level. | |
|
|
|
|
|
|
|
| Pressing the 7 button lowers the recording |
|
|
|
|
|
|
|
| level. |
To lower the recording level |
|
|
|
| To adjust the Channel 2 level | |||
| Press the 7 button while holding the 8 or |
| Press either the 6 or 7 button while | |||||
| t button to lower the audio recording levels |
| holding the t button. | |||||
SET | for | Channel | 1 | and | Channel | 2 | SET | Pressing the 6 button raises the recording |
| simultaneously. |
|
|
|
|
| level. | |
|
|
|
|
|
|
|
| Pressing the 7 button lowers the recording |
|
|
|
|
|
|
|
| level. |
Returning Audio Recording Levels to Default Settings (UNITY MODE)
Press and hold the 8 and t buttons simultaneously to return the audio recording levels to their default settings (i.e., unity gain).
●Both of the audio recording levels will be fixed at the default setting.