JVC BD-X200E manual Recording Operations Using a DV Camera Trigger, Video OUT Audio OUT

Recording Operations Using a DV Camera Trigger

By connecting a camera featuring a DV terminal to this DVD recorder, audio and video from the camera can be easily recorded to a disc. In this type of situation, the DV camera’s trigger button is used to control the BD-X200.

Supported cameras: GY-DV5000 and GY-DV5001.

Signal Connections

TV set or monitor

English

Rear panel		VIDEO OUT					AUDIO OUT
		VIDEO				AUDIO
		IN	LINE	OUT	INPUT		CH1
					LEVEL	IN	OUT
						4dB
GY-DV5000						8dB
		IN	Y/C
							CH2
		DV IN/OUT				REMOTE
	LAN	SIGNAL			USB	DC 19V
		GND
DV terminal				DV IN/OUT terminal
(video, audio, and control signals)
DV cables:
VC-VDV204 (2 m, 4P-4P) from JVC
VC-VDV206 (2 m, 4P-6P) from JVC

●Connect the DV IN/OUT terminal on the rear of your BD-X200 to the DV terminal on the GY-DV5000 or GY-DV5001 using a DV (IEEE1394) cable. One of the commercially-available cables indicated above should be used for this purpose.

●Connect the DVD recorder’s VIDEO LINE OUT and AUDIO OUT terminals to the monitor’s video in and audio in terminals.

Setup Procedures

●Insert a recordable disc into your BD-X200.

Settings

GY-DV5000 or GY-DV5001 : Set DV REC TRIGGER from the OTHERS MENU (1/2) screen to ON.

BD-X200: Set REMOTE SELECT from the REMOTE MENU screen to DV(TRIGGER). Input will automatically be DV.

REMOTE MENU screen

REMOTE MENU
MENU
REMOTE SELECT	DV(TRIGGER)
REC CONTROL	OFF
REM FF/REW MODE	FF/REW

●The BD-X200 will adopt Slave mode. (It will not be possible to control recording operations from the DVD recorder.)

Note

Not compatible with the REPLICATION feature of BR-DV6000.

Procedure

Recording on the BD-X200 will start and stop in response to operation of the trigger button on the GY-DV5000 or GY-DV5001.

*When using, make sure triggers are at least 1 second apart.

E-77