JVC LPT1029-001A manual Preset Download, Set/Auto Guide Programme Number Set

20 EN INITIAL SETTINGS

	Preset Download	If you have connected the unit to your TV via a 21-pin SCART
		cable (A pg. 18), the unit will automatically perform Preset
		Download instead of the Auto Set Up in step 2 on page 19. After
Auto Channel Set by Downloading from TV/Auto Clock
		downloading, the unit sets the clock and Guide Programme
Set/Auto Guide Programme Number Set		numbers automatically.
		● Slide the TV/CABLE/SAT/DVD switch to DVD.

ATTENTION:

You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.

1Press A on the unit or DVD A on the remote control to turn on the unit. The AUTO SET/T-V LINK display appears on the TV screen.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

CABLE/SAT

TV DVD

ENTER

Selection Keys

DE

2Press selection keys to select AT-V LINKB and press ENTER. The T-V LINK screen will appear.

●When T-V LINK is completed, ASCAN COMPLETEDB appears on the TV screen. Select AOKB.

INITIAL SET UP > AUTO CH SET

		AUTO SET	T-V LINK
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT
INITIAL SET UP > T-V LINK
		T-V LINK
		PLEASE WAIT...
		CANCEL
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT

ATTENTION:

Preset positions on the front display panel increase from APR 1B; do NOT press any button on the unit or remote control until the front display panel shows clock time, APR 1B or A– –:– –Bas illustrated on page 21.

●If you press any button on the unit or remote control while downloading is in progress, it will be interrupted.

NOTES:

●For details, refer to the instruction manual of your TV.

●In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set.

●If there is a power cut, or if you press A or SET UP while downloading or set up is in progress, it will be interrupted; be sure to turn off the unit power once and try again from the beginning.

●Auto Clock Set may not function properly depending on the reception condition.

●On this unit, the characters available for station names (ID) are A–Z, 0–9, –, Z, + and & (space). Some names of downloaded stations may differ from those of your TV. (A pg. 77)

After APreset DownloadB is completed, perform AMonitor SetB on page 23.