JVC LPT1029-001A manual Simulated Surround Effect Setting The Progressive Mode

34 EN BASIC OPERATIONS ON DVD DECK

Simulated Surround Effect Setting The Progressive Mode

It is possible to get a simulated surround effect from your stereo system. You can enjoy the virtual surround sound with your

2 channel stereo system.

1Press ON SCREEN twice to access the on-screen bar.

2Press selection keys to select A B, then press ENTER.

●A3D-ONBappears above the selected item and Simulated Surround Effect is activated.

●Each time you press ENTER, A3D-ONBappears and disappears alternately.

TITLE 99	CHAPTER 99	EACH 0:00
DVD-			3D-ON	CINEMA AUTO

VIDEO

To clear the on-screen bar

Press ON SCREEN.

To cancel the simulated surround effect

Press ENTER to clear A3D-ONBfrom the screen.

NOTES:

●Simulated Surround Effect works correctly only when playing back a title recorded in multichannels.

●Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the [DIGITAL AUDIO OUT] connectors.

●When Simulated Surround Effect is activated, the settings of AANALOG AUDIO OUTB and AD. RANGE CONTROLB are disabled. (A pg. 71)

●Simulated Surround Effect cannot be activated under the following conditions:

●When the HDD deck is in the recording mode.

●When the HDD or DVD deck is in the timer standby mode.

●When a disc containing both the Dolby Digital 5.1 CH and 2 CH sound formats is playing back a scene that is not in the 5.1 CH sound format.

Adjusting The Picture Quality

You can obtain optimal picture quality by selecting an appropriate picture mode.

1Press ON SCREEN twice to access the on-screen bar.

2Press selection keys to select AB, then press ENTER. The pop-up window appears under the selected item.

TITLE 99 CHAPTER 99 EACH 0:00

DVD-	CINEMA AUTO
VIDEO

3Press selection keys to select the desired option, then press

ENTER.

NORMAL:

Normally select this option.

CINEMA:

Suitable for a movie disc, etc.

SHARP:

Clearer, sharper-edged picture when viewing images with lots of flat, same-coloured surfaces such as cartoons.

SOFT:

Select this option when too much noise appears.

To clear the on-screen bar

Press ON SCREEN.

You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source).

1Set the unit to the progressive scan mode. (A pg. 73)

2Press ON SCREEN twice to access the on-screen bar.

3Press selection keys to select A B, then press ENTER. The pop-up window appears under the selected item.

TITLE 99 CHAPTER 99 EACH 0:00

DVD-	3D-ON CINEMA AUTO
VIDEO

4Press selection keys to select the desired option, then press

ENTER.

AUTO:

This mode automatically detects film and video content for progressive playback. When film content is found, flag detection is used to invoke playback of film data in full screen. When video content is found, pictures from multiple fields are used to detect sections with movement, and then this movement undergoes advanced image processing for output of sharp, detailed progressive images without any reduction in image quality where movement occurs. Normally, operation in this mode is recommended.

FILM:

Suitable for playing back a progressive scanned film source disc.

VIDEO:

Suitable for playing back a video source disc. The outlines on the played back pictures will be soft.

To clear the on-screen bar

Press ON SCREEN.

NOTE:

When the progressive mode is set, be sure to set AL-1 OUTPUTB to ACOMPONENTB (A pg. 66). Progressive scan is output only from [COMPONENT VIDEO OUT] connectors.