JVC LPT1029-001A manual Output/Input Set, Output And L-1Input Setting

66 EN EDITING

	Output/Input Set	* The boldface settings below indicate the settings at your purchase.
8 L-1 OUTPUT ^ SCART VIDEO / SCART S-VIDEO / SCART
			RGB / COMPONENT
● Turn on the TV and select the AV mode.			SCART VIDEO:
● Slide the TV/CABLE/SAT/DVD switch to DVD.			If a connected appliance’s input is compatible only with regular
			video signals, set to ASCART VIDEOB.

CABLE/SAT

TVDVD

ENTER

Selection Keys

FGDE

SCART S-VIDEO:

If a connected appliance’s input is compatible with Y/C signals, set to ASCART S-VIDEOB. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

SCART RGB:

If a connected appliance’s input is compatible with RGB signals, set to ASCART RGBB. You can obtain a high-quality RGB picture.

COMPONENT:

If a connected appliance’s input is compatible with Y/PB/PR signals, set to ACOMPONENTB. You can obtain a high-quality Y/PB/PR picture. Switch the TV to the input that you can watch component video pictures.

SET UP

L-1 Output And L-1Input Setting

The [L-1 IN/OUT] connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set AL-1 OUTPUTB and AL-1 INPUTB to the appropriate mode depending on the type of appliance connected to the unit’s [L-1 IN/OUT] connector.

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AFUNCTION SET UPB, then press G.

8L-1 INPUT ^ VIDEO / S-VIDEOVIDEO:

If a connected appliance’s output is compatible only with regular video signals, set to AVIDEOB.

S-VIDEO:

If a connected appliance’s output is compatible with Y/C signals, set to AS-VIDEOB.You can obtain a high-quality picture. (For connection, be sure to use a 21-pinSCART cable that is compatible with the Y/C signal.)

NOTES:

● If AL-1 OUTPUTB is set to ASCART S-VIDEOBor ASCART RGBB, it

is not possible to set AL-1 INPUTB to AS-VIDEOB.

● If AL-2 SELECTB is set to ASAT S-VIDEOBor ADECODERB, it is

not possible to set AL-1 INPUTB to AS-VIDEOB.

● If AL-2 SELECTB is set to ADECODERB, it is only possible to set

AL-1 OUTPUTB to ASCART VIDEOB.

● Component video signals are not output from the [L-1 IN/OUT]

connector.

● When Progressive scan mode is engaged, it is not possible to

3Press selection keys to select AVIDEO IN/ OUTB, then press G.

4Press selection keys to select AL-1 OUTPUTB or AL-1 INPUTB, then press

ENTER.

DVD VIDEO SET UP		HDD/DVD SET UP	FUNCTION SET UP		INITIAL SET UP
REC/PLAY SET UP		DISPLAY SET	VIDEO IN/OUT
	MONITOR TYPE			4:3LB
	F-1 INPUT
				VIDEO
	L-1 OUTPUT			SCART VIDEO
	L-1 INPUT
				VIDEO
	L-2 SELECT			VIDEO

select the setting of AL-1 OUTPUTB. (A pg. 66)

SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT

EXIT SELECT

5Press selection keys

	to select the	DVD VIDEO SET UP			HDD/DVD SET UP		FUNCTION SET UP		INITIAL SET UP
	appropriate setting,	REC/PLAY SET UP				DISPLAY SET	VIDEO IN/OUT
	then press ENTER.		MONITOR TYPE					4:3LB
6			F-1 INPUT
	Press SET UP to							VIDEO
	complete the setting.		L-1 OUTPUT					SCARTSCARTVIDEOVIDEO
			L-1 INPUT					SCART S-VIDEO
								VIDEO
\									SCART RGB
			L-2 SELECT					VIDEOCOMPONENT
		SET UP		ENTER		SELECT WITH @ THEN PRESS [ENTER]
				SELECT		PRESS [SET UP] TO EXIT
		EXIT