Manual Timer Programming, Relief Recording

TIMER RECORDING EN 49

Manual Timer Programming

8 Press selection keys to select ATV PROGB, then press

ENTER. Press selection keys to select the desired channel.

9 Press selection keys to select ACONFIRMB, then press

You can programme this unit to timer record as many as

ENTER.

16 programmes.

10 Set the other recording options as required.

If you do not know the PlusCode number for the programme you

wish to record, use the following procedure to set your unit to timer

● Refer to step 8 in AVIDEO Plus+® Timer ProgrammingB

record the programme.

(A pg. 47).

11 Press selection keys

● Make sure that the unit’s built-in clock is set properly.

to select AOKB, then

PROGRAMME > CALENDAR PR. (3/3)

● Turn on the unit.

press ENTER to

14/01/04 WED 22:30 - 23:00

BBC1

● Turn on the TV and select the AV mode.

GARDENING

[EDUCATION] FR360

access the

1:00 28:00

● Slide the TV/CABLE/SAT/DVD switch to DVD.

Programme

SELECT WITH @

INPUT TITLE

GARDENING

THEN PRESS [ENTER]

Confirmation screen.

ENTER.

●When APROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMESB appears on the TV screen, you need to cancel some of the reserved programmes. (A pg. 50)

4Press selection keys to select the desired date, then press

ENTER.

12 Press selection keys	PRESS [PROGRAMME] VPS/PDC		OFF
	TO EXIT	WEEKLY/DAILY	MON-FRI (FOR A WEEK)

to select AEXITB, then		REC MODE	FR360
press ENTER to	PROGRAMME	ENTER
			OK
	EXIT	SELECT
complete timer

programming.

●To programme another timer, press selection keys to select ACONTINUEB, then press ENTER.

●If APROGRAMME OVERLAPPEDB appears on the TV screen, delete or modify the programmes.

NOTES:

●When two successive programmes are recorded on a DVD-RW disc with Manual Timer Programming function, the beginning of the second one may be left off the recording.

●If the copy limited programme is received during timer recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed.

Satellite Receiver Users

To timer record a satellite broadcast using Manual Timer Programming:

APerform ASatellite Receiver Control SettingB (A pg. 24).

BPerform AManual Timer ProgrammingB (A pg. 49).

In step 8, press AUX to change ATV PROGB to ASATB. Then press selection keys to enter the channel position for the satellite broadcast.

CLeave the satellite receiver’s power on.

Relief Recording

When a programme that is set for the DVD deck cannot be recorded properly, the programme is recorded to the HDD deck

5Press selection keys to select ARECORD TOB, then press ENTER. Press selection keys to select the desired recording deck, then press ENTER.

2PROGRAMME > CALENDAR PR. (2/3)

14/01/04 WED 22:30 - 23:00	BBC1
	[MISC. ] XP

SELECT WITH @	RECORD TO	HDD
THEN PRESS [ENTER]
	START	22:30

PRESS [PROGRAMME]	STOP	23:00
TO EXIT
[0]: SAT	TV PROG	BBC1
[0]: SAT

instead in XP mode.

●If the remaining capacity of the hard disc is not sufficient, the programme is recorded to the DVD deck until the remaining capacity of the DVD disc lasts.

●If AJUSTB is selected for the recording mode, the current recording mode for the DVD deck is applied.

6	Press selection keys	PROGRAMME	ENTER
6	Press selection keys		CONFIRM
	to select ASTARTB,	EXIT	SELECT
	to select ASTARTB,

then press ENTER.

Press selection keys to set the desired start time, then press

ENTER.

●Each press of FG increases/decreases the start time in 1 minute interval.

●To increase/decrease the start time in 30 minutes interval, press and hold FG.

7Press selection keys to select ASTOPB, then press ENTER. Press selection keys to set the desired stop time, then press

ENTER.

●Each press of FG increases/decreases the stop time in 1 minute interval.

●To increase/decrease the stop time in 30 minutes interval, press and hold FG.