JVC LPT1029-001A manual Mode Set

SUBSIDIARY SETTINGS EN 71

	Mode Set	6 Press SET UP to complete the setting.
		* The boldface settings below indicate the settings at your purchase.
		AUDIO OUTPUT
● Turn on the unit.
● Turn on the TV and select the AV mode.
		8 DIGITAL AUDIO OUT ^ DOLBY DIGITAL/PCM / STREAM/
● Slide the TV/CABLE/SAT/DVD switch to DVD.
			PCM / PCM ONLY

CABLE/SAT

TVDVD

ENTER

Selection Keys

FGDE

SET UP

AUDIO

Various modes of this unit are categorized into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 71 through 73), then follow the procedure below.

DVD VIDEO SET UP	LANGUAGE SET (A pg. 22)
	AUDIO OUTPUT (A pg. 71)
	PARENTAL LOCK (A pg. 36)
	DISC PLAY SET UP (A pg. 72)
HDD/DVD SET UP	HDD SET UP (A pg. 72)
	DVD SET UP (A pg. 72)
	DISC SET UP (A pg. 79, 80)
FUNCTION SET UP	REC/PLAY SET UP (A pg. 72)
	DISPLAY SET (A pg. 73)
	VIDEO IN/OUT (A pg. 23, 66)
INITIAL SET UP	TUNER SET (A pg. 75)
	CLOCK SET (A pg. 78)

●The procedure below shows how to set the desired option of the AAUDIO RECB mode as an example.

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AFUNCTION SET UPB, then press G.

Set to the appropriate mode according to the type of the device connected to [DIGITAL AUDIO OUT] connector.

DOLBY DIGITAL/PCM:

Select this when you connect the digital input connector of a Dolby Digital Decoder or an amplifier with a built-in Dolby Digital Decoder.

STREAM/PCM:

Select this when you connect the digital input connector of an amplifier with a built-in DTS, Dolby Digital, or MPEG multichannel decoder.

PCM ONLY:

Select this when you connect the linear PCM digital input of other audio equipment (amplifier, MD or DAT deck, etc.).

NOTES:

●This setting also functions when HDD is active.

●If you watch or play back a title which contains multiple audio languages, select APCM ONLYB in advance and choose main or sub audio with AUDIO.

8ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND

Select the appropriate setting to accommodate the unit to the connected A/V equipment. This function takes effect when a DVD VIDEO disc is played back.

STEREO:

Select this when listening to conventional two-channel stereo audio with the unit’s [AUDIO OUT] connectors connected to a stereo amplifier/receiver or TV set, or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc, etc.

DOLBY SURROUND:

Select this when listening to multichannel surround audio with the unit’s [AUDIO OUT] connectors connected to an amplifier/ receiver with a built-in surround decoder or a surround decoder.

8D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE

The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format.

This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume.

NORMAL:

Normally select this setting to activate this function.

WIDE RANGE:

Select this to deactivate this function when you enjoy wide dynamic range programme.

TV MODE:

Select this when you hear the sound through the TV’s speaker(s).

NOTES:

● This function has no effect on programmes other than those

recorded in Dolby Digital format.

● This function does not work when Simulated Surround Effect is

3Press selection keys to select AREC/PLAY SET UPB, then press

G.

4Press selection keys to select AAUDIO RECB, then press

ENTER.

5Press selection keys to select the desired option, then press

ENTER.

DVD VIDEO SET UP HDD/DVD SET UP			FUNCTION SET UP	INITIAL SET UP
REC/PLAY SET UP		DISPLAY SET	VIDEO IN/OUT
XP MODE REC AUDIO			DOLBY DIGITAL
AUDIO REC			NICAM
DIRECT REC				OFF
INPUT COLOUR SYSTEM				PAL
JUMP TIME			15 MIN
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT

activated. (A pg. 34)

● The effect of ANORMALB and AWIDE RANGEB may not be

different depending on discs.

8OUTPUT LEVEL ^ STANDARD / LOW

You can lower the output level of analogue audio to accommodate the unit to the connected A/V equipment.

STANDARD:

Normally select this setting.

LOW:

The output level of analogue audio is lowered.