JVC LPT1029-001A manual Tuner Set, Auto Channel Set

DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP

		SUBSIDIARY SETTINGS EN 75
Tuner Set		5 View the Confirmation screen.
		AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is
		displayed on the TV screen. Select AOKB.
Your unit needs to memorise all necessary stations in channel		6 Press SET UP to complete the setting.
positions in order to record TV programmes. Auto Channel Set
		● Using the Confirmation screen, you can skip or add channel
automatically assigns all receivable stations in your area to call
		positions, enter station names and perform other operations.
them up by using the PR +/– buttons without going through any
		Refer to pages 76 – 77 for the procedures.
vacant channels.
		● Depending on reception conditions, the stations may not be
● Turn on the unit.		stored in order, and the station names may not be stored
● Turn on the TV and select the AV mode.		correctly.
● Slide the TV/CABLE/SAT/DVD switch to DVD.		IMPORTANT:
CABLE/SAT		● In certain reception conditions, station names may not be
TV	DVD	stored correctly, and Auto Guide Programme Number Set may
		not work properly. When the Guide Programme numbers are
		not set properly, the programme that you do not intended to
		record will be timer recorded by the VIDEO Plus+ system of
		the unit. When programming the timer using the VIDEO Plus+
		system, be sure to check the desired channel is selected
		correctly. (A pg. 47)
		● Your unit memorises all receivable stations even if reception of
		some of them is poor. You can delete those stations with an
ENTER		unacceptable picture from the list. (A pg. 76, ADelete A
		ChannelB)
Selection Keys
FGDE		NOTES:
		● Fine tuning is performed automatically during Auto Channel Set.
		If you want to perform tuning manually, refer to AFine-Tuning
		Channels Already StoredB (A pg. 77).
		● If you perform Auto Channel Set when the aerial cable is not
		connected properly, ASCAN COMPLETED -NO SIGNAL-B
		appears on the TV screen in step 5. In such a case, make sure of
SET UP		the aerial connection and press ENTER; Auto Channel Set will
		start again.

IMPORTANT:

Perform the following steps only if ^

^Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download. (A pg. 19, 20)

^you have moved to a different area or if a new station starts broadcasting in your area.

Auto Channel Set

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AINITIAL SET UPB, then press

G.

3Press selection keys to select ATUNER SETB, then press G.

4Press selection keys

to select AAUTO CH

SETB, then press	TUNER SET			CLOCK SET
ENTER.			AUTO CH SET				MANUAL CH SET
● When you have
connected the unit to a
TV offering T-V Link via			SAT CONTROL SET				GUIDE PROG SET
a fully-wired 21-pin
SCART cable	SET UP	ENTER			SELECT WITH @ THEN PRESS [ENTER]
(A pg. 18), the unit					PRESS [SET UP] TO EXIT
	EXIT	SELECT
automatically performs
the Preset Download	INITIAL SET UP > AUTO SET
and the T-V LINK
screen will appear.
(A pg. 20)					AUTO SET
● The Auto Set screen					PLEASE WAIT...
appears, and remains
on screen while the unit						CANCEL
searches for receivable	SET UP	ENTER			SELECT WITH @ THEN PRESS [ENTER]
stations.
					PRESS [SET UP] TO EXIT
	EXIT	SELECT