JVC LPT1029-001A manual Monitor Set, Pan&Scan/Letter Box

				INITIAL SETTINGS EN 23
Monitor Set		1 Press SET UP to access the Main Menu screen.
		● You cannot set the monitor type during recording or playback.
You can select the monitor type depending on the TV used when		2 Press selection keys to select AFUNCTION SET UPB, then
		press G.
you play back DVD VIDEO discs recorded for wide-screen TVs.
		3 Press selection keys to
			DVD VIDEO SET UP HDD/DVD SET UP			FUNCTION SET UP INITIAL SET UP
● Turn on the unit.		select AVIDEO IN/OUTB,
			REC/PLAY SET UP		DISPLAY SET	VIDEO IN/OUT
● Turn on the TV and select the AV mode.		then press G.
● Slide the TV/CABLE/SAT/DVD switch to DVD.		4 Press selection keys to	MONITOR TYPE			4:3LB
			F-1 INPUT			VIDEO
		select AMONITOR	L-1 OUTPUT			SCART VIDEO
		TYPEB, then press
CABLE/SAT			L-1 INPUT			VIDEO
		ENTER.
TV	DVD		L-2 SELECT			VIDEO
		5 Press selection keys to
			SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		select the desired option,			PRESS [SET UP] TO EXIT
			EXIT	SELECT

then press ENTER.

6 Press SET UP to complete the setting.

* The boldface settings below indicate the settings at your purchase.

ENTER

Selection Keys

FGDE

SET UP

8MONITOR TYPE - 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX

4:3LB (Letter Box conversion):

Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.

4:3PS (Pan&Scan):

Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen.

16:9AUTO (Wide television conversion):

Select this when the aspect ratio of your TV is 16:9 (wide TV).

16:9FIX (Wide television conversion):

Select this when the aspect ratio of your TV is fixed to 16:9 (wide TV). The unit automatically adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4:3.

Pan&Scan/Letter Box

In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio.

Material with this ratio will not fit to a TV with 4:3 aspect ratio. There are two styles to display the image, APan&ScanB (PS) and ALetter BoxB (LB).

Pan&Scan

The right and left side of the image are cut off. The image fills the screen.

● The picture will be shown in the A4:3LBB mode depending on the disc even if the A4:3PSB mode is selected.

Letter Box

Black bands appear at the top and bottom of the image. The image itself appears in 16:9 aspect ratio.