Runco LS-10I operation manual Using the On-Screen Menus

Operation

1.Press the MENU button on the remote control or system keypad to display the Main Menu.

2.There are six menus. Press or to select a sub-menu.

3.Press or to select a sub-menu item.

4.For each sub-menu item, the currently-selected value appears in white text or is otherwise highlighted. Press or to choose a setting for that item, or press ENTER to go to another sub-menu.

5.Press MENU to return to the previous menu.

6.From the Main Menu, press MENU to turn off the OSD menu.

The LS-10i OSD menus are arranged hierarchically, as shown in Figure 4-1.Depending on the selected input source and signal characteristics, some menu options may not be available.

4.5

Using the On-Screen Menus

	Aspect Ratio	16:9, 4:3, Letterbox, VirtualWide,
		Cinema or Virtual Cinema
		Recall Memory
	Memory
		Save Settings
		Save ISF
	Brightness
	Contrast	0, 1, 2 ... 100
Main	Color
	Tint
	Sharpness	0, 1, 2 ... 100
	Noise Reduction
	Overscan	Off, Crop or Zoom
	Input Select	HDMI 1, HDMI 2, RGB, Comp. 1,
		Comp. 2, Video, S-Video or SCART
	PIP Select	Off, HDMI 1, HDMI 2, RGB, Comp. 1,
		Comp. 2, Video, S-Video or SCART
	Resync	(press ENTER to execute)
	Color Space	Auto, REC709, REC601, RGB-PC or
		RGB-Video
	Video Standard	Auto, NTSC, PAL or SECAM
	Gamma	2.5, 2.35, 2.2, 2.0 or 1.8
	Color Temperature	5500K, 6500K, 7500K, 9300K or
		Native
	DLP Frame Rate	Auto, 48 Hz, 50 Hz or 60 Hz
	Color Gamut	Auto, REC709, SMPTE-C, EBU,
		Native or PCE
	ConstantContrast	On or Off
Advanced
	Adaptive Contrast	On or Off
	RGB Adjust	Red / Green / Blue Offset
		Red / Green / Blue Gain
		V. Position
		H. Position
	Fine Sync
		Phase
		Tracking
		Sync Level
		Red x, y / Green x, y / Blue x, y
	PCE
		Yellow x, y / Cyan x, y / Magenta x, y
		White x, y

	Input Enable	Off (SCART) or On (all others)
		for each source
		Top Left, Top Right, Bottom
	PIP Position	Left, Bottom Right,
		Picture-by-Picture or
		Split Screen
	Menu Position	Top Left, Top Right, Bottom
		Left, Bottom Right or Center
System	Translucent Menu	0% (opaque), 25%, 50% or
		75%
	Lamp Power	Economy or Standard
	Blank Screen	Black, Blue or White
	Auto Power Off
		On or Off
	Auto Power On
	Rear Projection
	Ceiling Mode	Auto, On or Off
	Logo Display	On or Off
	Power On Chime
	Lens Control	Focus, Zoom, Lens Shift
	HD 1 Key	HDMI 1, HDMI 2, RGB (HD 3),
		Comp. 1 (HD 1), Comp. 2
	HD 2 Key
		(HD 2), Video, S-Video, SCART
Control	HD 3 Key
		or PIP
	CineWide	Off, CineWide or AutoScope
	Trigger 1	AutoScope (Trigger 2), Lamp
		(Trigger 1), 4:3 or RS-232
	Trigger 2
	HDMI CEC	On or Off
Language	English, French, German, Italian, Spanish, Swedish,
	Portuguese or Russian
	Model Name
	Unit Serial Number
	Software Version
	Active/PIP Source	(read-only)
	Pixel Clock
	Signal Format
Service	H/V Refresh Rate
	Lamp Hours
	Lamp Hour Reset	Reset? (Yes or No)
	Factory Reset	Reset Everything?
		(Yes or No)
	Blue Only	On or Off
	Test Patterns	On or Off
	Altitude	Auto or High

Note: Default settings appear in bold type.

Figure 4-1. LS-10i OSD Menu Structure

Runco LS-10i Installation/Operation Manual 45