Runco LS-10I operation manual LS-10i Specifications, Proteus 1 None Proteus 2, 3, 4, 5

Specifications

7. Specifications

Table 7-1lists the LS-10i specifications.	7.1
Table 7-1. LS-10i Specifications	LS-10i Specifications

Projector Type:

Video Processing:

Native Resolution:

Aspect Ratios:

Projection Modes:

Video Standards:

DTV Compatibility:

Picture Size (16:9 Screen):

Throw Distance (Factor x Screen Width):

Lens System:

Vertical Lens Shift Range:

Horizontal Lens Shift Range:

Lamp:

Estimated Lamp Life:

Cooling Performance:

Calibration:

Color Gamut:

Digital Light Processing™ (DLP), 3-chip, 16:9 SuperOnyx™ DMD™

Runco advanced ViVix processing with 10 bit independent dual channel image processing, true 1080i deinterlacing, latest motion adaptive processing, 3D noise reduction, detail enhancement, rich color processing and noise reduction, less than one frame latency

1,920 x 1,080 (2,073,600 pixels)

16:9, Letterbox, 4:3, VirtualWide, Cinema, Virtual Cinema (Anamorphic lens compatible)

Front, Rear, Ceiling (front/rear)

NTSC, PAL, SECAM, CEA-861D

480i, 480p, 576i, 576p, 720p, 1080i 50/60, 1080p 24/50/60

Recommended Width: 72 - 120 in.

Maximum Width: 180 in.

Refer to Table 3-3

Motorized focus, zoom, vertical and horizontal shift

Proteus 1: None

Proteus 2, 3, 4, 5, 6:

65% of screen height above or below lens center

(130% of one half of the screen height)

Proteus 1: None

Proteus 2, 3, 4, 5, 6:

30% of screen width left or right of lens center (60% of one half of the screen width)

230/260W (selectable) HPM lamp

2000 hours, typical (260W power setting);

3000 hours, typical (230W power setting);

High efficiency adaptive voltage side-to-side cooling with low system acoustic noise level and low light pollution cabinet

ISF Certified Calibration Configuration

> BT.709 (REC709)

Runco LS-10i Installation/Operation Manual 89