TacT Audio RCS 2.0S owner manual REM menu, Addr menu

						Front Panel Display
REM menu	The remote menu allows for disabling or enabling the remote control. Once the re-
	mote control is disabled the unit can only be controlled from the front panel of the
	unit.
	Remote Menu :			2
		REMOTE CONTROL:
					ON
			OFF	ON
				1
		1 - Remote control settings.
		2 - Active remote control setting.
	Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it
	with the “ENTER” button.

ADDR menu	The address menu allows for the setting of the systems exclusive address for the
	unit. The default address setting is “001”. If multiple Tact products are used to-
	gether, different addresses will allow for individual control of each product.
	Address Menu :	2

CURRENT ADDRESS: 001

ADDRESS: 001

1

1 - Address settings.

2 - Active address setting.

Use the “UP” and “DOWN” navigational buttons to select the desired system ad- dress and then press the “ENTER” button to select it.

NOTE: If you change the device address make sure that you select the ap- propriate device address in the RCS 2.0S Room Correction software.

Tact Audio 21