TacT Audio RCS 2.0S owner manual

Important Safety

Instructions

Cleaning and

Maintenance

“Note” symbol

4 Tact Audio

1.Read these instructions entirely before installing or operating this equipment.

2.Keep these instructions.

3.Heed all warnings.

4.Do not use this equipment near water or allow it to become wet.

5.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

6.Do not install near any heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat,; doing so may damage the unit and present a fire hazard.

7.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. If the provided plug does not fit into your outlet, consult an electrician for replacement of the outlet to one that is polarized. To protect against electrical shock, match the wide blade of the polarized plug to the wide slot in the outlet and fully insert the plug.

8.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the equipment. Do not use this unit with a damaged cord or plug.

9.Only use attachments/accessories specified by the manufacturer.

10.Unplug this equipment during lightning storms or when unused for long periods of time.

11.Refer all servicing to qualified service personnel.

1.Always unplug the unit from the electrical outlet before cleaning.

2.Do not use abrasive cleaners. Simply wipe the exterior with a clean soft cloth. A small amount of nonabrasive cleaner may be used on the cloth to remove excessive dirt or fingerprints.

The >note< symbol indicates information very useful or essential to daily operation.