TacT Audio RCS 2.0S owner manual Acknowledgments, Registration

Page 5

IMPORTANT!

Acknowledgments

© 2003 Tact Audio Corporation. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying or other wise, without the prior written consent of the Tact Audio Corporation.

The information contained in this document is subject to change without notice.

Registration

Please record your serial number here for future reference. You will need this for future upgrades or should you ever require service on your RCS 2.0S Preamplifier.

RCS 2.0S serial number: _____________________

 

Optional modules installed:

 

DAC analog output

:__

ADC analog input

:__

Tact Audio 5

Image 5
Contents RCS 2.0S Blank Tact Audio Page Registration AcknowledgmentsTable of contents Unpacking the RCS 2.0S Accessories Operating voltageIntroduction Digital input Digital Output RCS 2.0S ConnectionsDigital Input Section Digital Output Section Tact AudioAnalog Input RCS 2.0S Connections Optional ModulesOptional DAC module Analog OutputAnalog Output Section Microphone input Microphone Input Tact AudioRCS 2.0S Connections RS-232 interface Tact Audio AC mains input & mains switchPorts RS-232 Interface Ports AC mains inputMenu Front Panel ControlsStandby Input selector Remote Control Correction block Volume BlockEQ preset selection Correction preset selectionInput sampling frequency indicator Front Panel DisplaySaving Menu SettingsDelay menu Assigned to each input independently Right for each room correction preset including bypassUP and Down buttons to change its value Test menu Displ menuAnd/or daisy chain RS232 ports to link multiple components Selection before the AMP setting will be enabledAddr menu REM menuPreset Link N Link Y EQ L Parametric EQ LEV OCTTer Tact Audio Front Panel Display Tone menuFrequency and Octave Info menu OFS menuYour computer system must meet the following requirements TacT 2.0S Room Correction SoftwareRCS-2.0 S to your Connect yourComputer Connection at this timeTact Audio Blank Before You Begin Quick SetupStep Quick Setup Getting StartedQuick Setup Automation Update the RCS 2.0S Firmware Tact-2.0 S Programing Mode Update the RCS 2.0S Firmware Restoring the Default Update the RCS 2.0S Firmware StepRCS 2.0S Settings Default Settings windowBlank Tact Audio TacT Audio, Inc