TacT Audio RCS 2.0S Connections RS-232 interface, RS-232 Interface Ports AC mains input

Page 12

RCS 2.0S Connections
	RS-232 interface	The RCS 2.0S has two RS232 interface ports:
	ports	- INPUT
		- INPUT
		-AUX
		Use the “INPUT” port for communication with your Personal Computer.
		Use the “AUX” port to connect to TacT digital amplifiers.

RS-232 Interface Ports

AC mains input

Connect the RCS 2.0S to the AC mains wall socket.

&mains switch Use the mains switch to turn power ON or OFF.

Use the supplied IEC mains cable, or if other - only a 3-prong grounded cable

12 Tact Audio

AC mains input & mains switch

Image 12

Contents RCS 2.0S Blank Tact Audio Page Acknowledgments RegistrationTable of contents Accessories Operating voltage Unpacking the RCS 2.0SIntroduction RCS 2.0S Connections Digital input Digital OutputDigital Input Section Digital Output Section Tact AudioRCS 2.0S Connections Optional Modules Analog InputAnalog Output Optional DAC moduleAnalog Output Section Microphone input Microphone Input Tact AudioTact Audio AC mains input & mains switch RCS 2.0S Connections RS-232 interfacePorts RS-232 Interface Ports AC mains inputFront Panel Controls Standby Input selectorMenu Remote Control Volume Block Correction blockCorrection preset selection EQ preset selectionInput sampling frequency indicator Front Panel DisplaySettings Delay menuSaving Menu Right for each room correction preset including bypass UP and Down buttons to change its valueAssigned to each input independently Displ menu Test menuSelection before the AMP setting will be enabled And/or daisy chain RS232 ports to link multiple componentsREM menu Addr menuPreset Link N Link Y EQ L LEV OCT Parametric EQFront Panel Display Tone menu Frequency and OctaveTer Tact Audio OFS menu Info menuTacT 2.0S Room Correction Software Your computer system must meet the following requirementsConnect your RCS-2.0 S to yourComputer Connection at this timeTact Audio Blank Quick Setup Before You BeginQuick Setup Getting Started StepQuick Setup Automation Update the RCS 2.0S Firmware Tact-2.0 S Programing Mode Update the RCS 2.0S Firmware Update the RCS 2.0S Firmware Step Restoring the DefaultRCS 2.0S Settings Default Settings windowBlank Tact Audio TacT Audio, Inc